Stator connectors and pins

[kpke]

I went for a ride today but not far due to no charging. Rode home and started troubleshooting. 2 of the 3 white wires from the stator are broken at the 4 pin connector on the harness side. I pulled all the wires out of the harness and replaced them.



Does the pinout matter for these 3 white wires? Can any of the 3 white wires mate up with the 3 white wires at the 6 pin connector going into the rectifier? They are AC going into the rectifier, are they phased in any way?

Has anyone sourced these 4 pin connectors and pins? Really I only need the pins. None of my vintage connections pins match these pins. If I can’t find replacements I will have to change it out to a different connector on both ends. But this would change the stator cable connector and if I ever replaced the stator in the future the factory connector wouldn’t work, it would have to be changed to mate with the change I make in the harness.

[JonW]

any wire can be connected to any other white.

Ive seen the connectors for sale, but dont have a link sorry.

[kpke]

Thank you Jon. I figured as much on the white wires.

Anyone else have a source for these connectors and/or pins?

[RZed]

Ken,
Here's a couple to try.
http://vintageconnections.com/
http://www.cycleterminal.com/motorcycle-connectors.html
And one more. http://www.oregonmotorcycleparts.com/connectors.html

Charlie

[kpke]

Thanks Charlie. I'm still not finding that particular connector/pins.

I went ahead and swapped out both ends with a standard vintage connections 4 pin.

Back on the road!