Page 1 of 1
pingel petcock
Posted: Sun Jul 04, 2021 9:12 pm
by two-stroke-brit
any one know how to get the correct pingel petcock for the RD350LC. ?
is it a straight bolt up deal ?
Thanks Mark
Re: pingel petcock
Posted: Sun Jul 04, 2021 10:33 pm
by Smoker
Search "petcock" and "Smoker" as the author.
I haven't seen anyone else do it.
Some pics here:
viewtopic.php?f=5&t=2499&p=122180&hilit=Petcock#p122180
Re: pingel petcock
Posted: Mon Jul 05, 2021 11:39 am
by two-stroke-brit
thanks for that, looks straight forward to make.
cheers mark
Re: pingel petcock
Posted: Mon Jul 05, 2021 2:53 pm
by two-stroke-brit
'jeez Louise" they sure are proud of the pingel petcocks, $150 for a dual outlet with reserve posted.
must be coming in a gold box,
cheers mark
Re: pingel petcock
Posted: Tue Jul 06, 2021 3:31 am
by Smoker
two-stroke-brit wrote: ↑Mon Jul 05, 2021 2:53 pm
'jeez Louise" they sure are proud of the pingel petcocks, $150 for a dual outlet with reserve posted.
must be coming in a gold box,
cheers mark
Price sounds good to me. The Pingle Guzzler and adapter I bought were over $200. Not to mention what I spent on the one-off knob setup.
If you look on Ebay, there are many Pingel petcocks that sell for a higher price.
You don't have to go with the #1 company out there. There are other companies that make much cheaper parts.
https://www.dragbike.com/mps-high-flow-petcocks/
Re: pingel petcock
Posted: Tue Jul 06, 2021 3:33 am
by JonW
I have a few pingels, theyre nice kit but not cheap.
Re: pingel petcock
Posted: Tue Jul 06, 2021 12:09 pm
by two-stroke-brit
Smoker wrote: ↑Tue Jul 06, 2021 3:31 am
two-stroke-brit wrote: ↑Mon Jul 05, 2021 2:53 pm
'jeez Louise" they sure are proud of the pingel petcocks, $150 for a dual outlet with reserve posted.
must be coming in a gold box,
cheers mark
Price sounds good to me. The Pingle Guzzler and adapter I bought were over $200. Not to mention what I spent on the one-off knob setup.
If you look on Ebay, there are many Pingel petcocks that sell for a higher price.
You don't have to go with the #1 company out there. There are other companies that make much cheaper parts.
https://www.dragbike.com/mps-high-flow-petcocks/
Thanks for the link to the cheaper version.
i will try them next time.
cheers mark