RZ/RD 350 & Misc. 2-Stroke Tech BBS

Yes, OEM item c. 1984. A little hard to find now.

Central Texas is a big area. You might want to narrow it down a bit.

Are you familiar with the TWT website? There's a good chance that there's someone in your area that could lend a hand.

http://www.twtex.com/forums/?


Good luck!

Stroker wrote:Very nice are those factory pipes i see there

Yes Sir. Factory Pipe Product pipes.

Thanks for the kind comments! I've learned a lot hanging out here with you 'smokers'.

If any of you pass through the north Texas area, the beer is on me!

Nice job.Are you happy with it? Thank you. I'm happy with it. It tracks true, pulls good, and looks OK. I'm just thrilled to get it back on the road after all this time. I forgot what that two-stoke rush was like. :smt003 I wasn't going for a full resto job, just wanted it to run well and look some...

Well, after about six months of on and off work, I have my RZ about where I want it. I bought it new in 1984 and promptly tore it up in a lowside crash in '86. It's been parked in the garden shed for all these years. I won't bore you with all the details of getting it back on the road. It was the us...

Don't know if you've seen this...

Oil capacity is 8.55 US oz. per leg. The manual says 10W-30 motor oil for the oil. I've known people to use 10W or 15W fork oil or even Mobil 1 ATF fluid.

The flat side goes up.

Thanks! I figured what the heck, it doesn't work anyway.

My guess is most of the failures in the 29K is from bad solder joints instead of component failure.

Since I have a Zeeltronic unit on order and my current 29K CDI wouldn't work anymore, even with the 'stick across it mod', I decided to tear it open and see what I could do. First step was to discover what side the PCB was on. Top or bottom of the unit. I used a small screw driver to start picking a...

tomo91 wrote:order it straight off borut thats the easiest

when i paid he said he only took direct deposit but i think he has paypal now or was trying to get it

www.zeeltronic.com

This is what I did. Paypal is now accepted with a 4% surcharge.

Hey everyone - I've now opened up this forum for avatars, PM (personal messaging) and Email (click an email button to send email to another poster in a forum thread). Sorry it took me so long to add these features... :oops: Use the PM and Email features to quickly communicate with other forum membe...

aaronmvrider wrote:
when you get it can you detail what needs to be done for installation for others to see
Cheers
Aaron

I might just do that.

Well, I've been talking to Borut via email the past few weeks.

I went ahead and ordered a PCDI-10V unit along with the programmer unit. Should be here in the next 7-14 days.

I feel like a kid waiting on Christmas!