Hi Team:
Apologies in advance for asking or posting in the wrong forum.
Does anyone know if it is possible to get the Yamaha R1 spedo/tacho dash to work on the RD350B? I am building mine into a cafe racer style RD, along with the Vape/MZB iggy.
Has anyone ever used the electronic dash from any modern Japanese bike on their Air Cooled RD's? Appreciate the guidance.
Cheers,
Daryl
RD350B
Moderator: rztom
Re: RD350B
I'd throw in using Koso RX1 / 2 units as they come close to what you're after:
https://www.caferacerwebshop.com/de/rx2 ... alarm.html
They come with a manual and you can get several additional sensors like CHT
https://www.caferacerwebshop.com/de/10m ... rte-c.html
My favorite gadget from Koso: the speed sensor that replaces the stock speedometer shaft:
https://www.fc-moto.de/epages/fcm.sf/?c ... PB-360-312
The tach signal is easy as the old RDs use a points ignition that has a useable signal on the HT primary side.
https://www.caferacerwebshop.com/de/rx2 ... alarm.html
They come with a manual and you can get several additional sensors like CHT
https://www.caferacerwebshop.com/de/10m ... rte-c.html
My favorite gadget from Koso: the speed sensor that replaces the stock speedometer shaft:
https://www.fc-moto.de/epages/fcm.sf/?c ... PB-360-312
The tach signal is easy as the old RDs use a points ignition that has a useable signal on the HT primary side.
Bye
Martin
Martin
Re: RD350B
I agree with MK on this. I have KOSO on a 350 and 500. However, if you need an R1 gauge I have one in perfect condition I purchased xx years ago. Ready to ship to anywhere in the US.
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1