After my previous debacle, I'm looking to have another set of LC cylinders tuned.
Likely nothing too drastic.
Blueprint plus a little nip n' tuck here and there. Wide spread midrange tune.
Most of the top guys are in the UK, but shipping back and forth would be a killer.
Who would you choose to do the work?
LC porting who?
LC porting who?
Wasting time on 2T forums since the dawn of the internet. RD350LC, TDR250, plated 300XCW. No four strokes.
Re: LC porting who?
Bill Wilson
https://wilsonperformance.net/
He rides an RD350LC and RZ500
Active on the 500 side of the forum. Many years experience and very nice work. There was a thread on here, someone had a RZ350 ported by him with impressive results.
https://wilsonperformance.net/
He rides an RD350LC and RZ500
Active on the 500 side of the forum. Many years experience and very nice work. There was a thread on here, someone had a RZ350 ported by him with impressive results.
Colin
79 RD400F Daytona Special
81 RD350LC
89 TDR250
75 Kawasaki H1 500
77 Can-am Tnt250
79 RD400F Daytona Special
81 RD350LC
89 TDR250
75 Kawasaki H1 500
77 Can-am Tnt250
Re: LC porting who?
I second Bill Wilson, Absolute top guy to work with, Great on the phone etc, Work is just top notch..
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1984 GPZ750 Turbo
1989 VFR750R RC30
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1984 GPZ750 Turbo
1989 VFR750R RC30
Re: LC porting who?
I was talking to Ed Erlanbach about this kind of porting. clean up and not much raising the ports to add more usable power. im sending him a set of cylinders as a horse trade for something else. Thanks Jim! He also ports the intake to install YZ85 reeeds in them.
Official LC whore.
Re: LC porting who?
Yep! I've been talking to Ed as well. Glad you guys were able to work something out.robakun wrote: ↑Fri Oct 25, 2019 2:57 am I was talking to Ed Erlanbach about this kind of porting. clean up and not much raising the ports to add more usable power. im sending him a set of cylinders as a horse trade for something else. Thanks Jim! He also ports the intake to install YZ85 reeeds in them.
He was really enthusiastic about working on my cyls. Looks like he's the right guy for the job.
Wasting time on 2T forums since the dawn of the internet. RD350LC, TDR250, plated 300XCW. No four strokes.