Hi Guys
Can anyone tell me if the banshee shift drum will work with the RD/RZ350pv engine . seems they are still available
Thanks
Paul
Banshee shift drum in RZ350
Moderator: rztom
Re: Banshee shift drum in RZ350
Dont know for sure sorry but I've used banshee shift forks in rz box/selector drum with nps.
Re: Banshee shift drum in RZ350
Should be the same I would think. Is it the same part number?
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
-
- Posts: 17
- Joined: Mon Oct 31, 2016 9:02 pm
Re: Banshee shift drum in RZ350
Banshee is 2GU. RZ is 29L. But look the same on parts fiche...JonW wrote:Should be the same I would think. Is it the same part number?
-
- Posts: 17
- Joined: Mon Oct 31, 2016 9:02 pm
Re: Banshee shift drum in RZ350
Shift forks and drive shaft have same pn, main shaft is different. I think the banshee gears Are wider? So would they require a different drum pattern?
Re: Banshee shift drum in RZ350
I swapped just the shafts between the RZ and banshee leaving the original drum/forks in the case.
That works fine, so I strongly suspect if there'd be any difference required on the drum to run a banshee tranny, I'd have noticed.
Logically it should work using the banshee drum in the RZ.
The difference in the shafts is that the banshee runs different ratios in a couple of gears (5'th to 6'th for example is a bigger jump than on the RZ).
That works fine, so I strongly suspect if there'd be any difference required on the drum to run a banshee tranny, I'd have noticed.
Logically it should work using the banshee drum in the RZ.
The difference in the shafts is that the banshee runs different ratios in a couple of gears (5'th to 6'th for example is a bigger jump than on the RZ).
Bye
Martin
Martin
-
- Posts: 17
- Joined: Mon Oct 31, 2016 9:02 pm
Re: Banshee shift drum in RZ350
Thanks Gents..
All very helpful as always.
Paul
All very helpful as always.
Paul