Annual SFRC 2T Ride Pics 09/22/2012 (Canby, OR)

News on forum updates, enhancements and/or special announcements

Moderator: rztom

Message
Author
User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

Annual SFRC 2T Ride Pics 09/22/2012 (Canby, OR)

#1 Post by pushstartrearset » Wed Sep 26, 2012 3:54 pm

Here's a taste of some track time @ Pat's Acres in Canby, OR on 09/22/2012....sorry for the poor quality. $10 for 15 minutes of track time. SFRC paid about 1/2 the cost so all the old strokers could afford some time if they wished.

http://www.youtube.com/watch?v=QgqSFyy4PgU

Pics to come..
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#2 Post by pushstartrearset » Wed Sep 26, 2012 3:59 pm

Start of the ride @ Beulahland in Portland, OR.

Image

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#3 Post by pushstartrearset » Wed Sep 26, 2012 4:00 pm

JImbo (TDR250) & daughter...great pic.

Image
Last edited by pushstartrearset on Wed Sep 26, 2012 4:05 pm, edited 1 time in total.
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#4 Post by pushstartrearset » Wed Sep 26, 2012 4:02 pm

Honda Dash Nova 125 c.c. 2T terror!

Image

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#5 Post by pushstartrearset » Wed Sep 26, 2012 4:07 pm

Jim's TDR250

Image

Image

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#6 Post by pushstartrearset » Wed Sep 26, 2012 4:27 pm

RZed

Image

Image

Image

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#7 Post by pushstartrearset » Wed Sep 26, 2012 4:35 pm

triple time. :smt004

Image

Image

Image

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#8 Post by pushstartrearset » Wed Sep 26, 2012 4:38 pm

endless 15 mph corners

Image

reverse R...tight!

Image

last corner before the start straight

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#9 Post by pushstartrearset » Wed Sep 26, 2012 4:42 pm

parking lot pics (Pat's Acres)

Image

Image

our bike is the 85 yellow/black RZ350...took that out for 15 minutes chasing the silver RS250

Image

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#10 Post by pushstartrearset » Wed Sep 26, 2012 4:46 pm

cut like a knife. sting like a bee

Image

This triple sounded badass

Image

Image

more pics to come a little later...
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
ricar
Posts: 1438
Joined: Sun Aug 23, 2009 8:42 am
Location: Waterdown ONT.

#11 Post by ricar » Wed Sep 26, 2012 7:07 pm

$10 for 15 minutes.... I would not go home after that. My wife would kill me for the insurance money.
84 RZ. Half naked, SpecIIs, GSXR front end, FZ swingarm, SV rear wheel, trail tech speedo/tach

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#12 Post by pushstartrearset » Wed Sep 26, 2012 7:25 pm

ricar wrote:$10 for 15 minutes.... I would not go home after that. My wife would kill me for the insurance money.
i paid for 2 sessions, but was so out of shape, that i had to sit out the 2nd one. LOTS of fun. Can't wait to do it again next year.
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#13 Post by pushstartrearset » Wed Sep 26, 2012 7:30 pm

Rare pro-flo pipes. I had a set early 90s. good pipes.

Image

One of these RD350s was really fast (rider that is)....his bezel broke leaving the speedo hanging, he was missing a inner muffler on one side (stock pipes) and scraped his knee and pegs. impressive.

Image

[/img]
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#14 Post by pushstartrearset » Wed Sep 26, 2012 7:33 pm

I believe this is a bridgestone!! Not sure of engine size.

Image

CB160 or 175 i think. A properly tuned one will do between 80~90mph. My ex-racer friend would drag knee on this little bike...serious CB160 racing @ PIR in the summer. Fun to watch and they carry quite a bit of speed!!

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

#15 Post by pushstartrearset » Wed Sep 26, 2012 7:35 pm

remaining shots i had at the beginning of the ride:

Image

Image

Image
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

Post Reply