My completed 85 RZ hybrid project
Moderator: rztom
My completed 85 RZ hybrid project
Hello all,
I just finished up my project recently, and thought I'd share the results. I think it turned out pretty good for my first build.
It took about 3 months to do the build. Lots of trial and error finding a rear shock that works with that particular swingarm.
And some of the brackets and bushings I had to make. The bike rides real nice. In the future, I will re-valve the rear shock and put on a steering damper.
The parts list includes:
99 R1 complete front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
SV 650 rear wheel
SV 650 rear brake caliper
JL GP stainless pipes
Charlie
I just finished up my project recently, and thought I'd share the results. I think it turned out pretty good for my first build.
It took about 3 months to do the build. Lots of trial and error finding a rear shock that works with that particular swingarm.
And some of the brackets and bushings I had to make. The bike rides real nice. In the future, I will re-valve the rear shock and put on a steering damper.
The parts list includes:
99 R1 complete front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
SV 650 rear wheel
SV 650 rear brake caliper
JL GP stainless pipes
Charlie
Last edited by RZed on Sun Mar 27, 2016 2:54 am, edited 2 times in total.
1985 RZ 421 Hybrid viewtopic.php?t=9655
99 R1 USD front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
JL GP stainless pipes
2018 XSR 900
99 R1 USD front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
JL GP stainless pipes
2018 XSR 900
Re: My completed 85 RZ hybrid project
RZed,
VJ22 shock works with the VJ23 swingarm,when you use the adapter brackets that bolt to the lower center stand bracket. Using the VJ23 brake calipher and bracket would allow you to get
rid of having to use the brake stay arm. Bike looks nice.
VJ22 shock works with the VJ23 swingarm,when you use the adapter brackets that bolt to the lower center stand bracket. Using the VJ23 brake calipher and bracket would allow you to get
rid of having to use the brake stay arm. Bike looks nice.
- aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
Re: My completed 85 RZ hybrid project
very tough looking bike.... love it....
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
Re: My completed 85 RZ hybrid project
3 Months, Bugger me.
Nice work, looks like she can be a daily rider too.
Not too much bling to worry about riding it everyday/where, you obviously don't mind it getting wet.
I like it a lot. Well done.
Nice work, looks like she can be a daily rider too.
Not too much bling to worry about riding it everyday/where, you obviously don't mind it getting wet.
I like it a lot. Well done.
76 TZ350(project).
82 RD350LC.
82 SR250.
83 RZ350YPVS.
88 RZ250 YPVS(project).
83 FJ1100.
96 YZF750R(track bike).
99 YZF1000 R1.
00 YZF1000 R1.
72 CB750four.
Lifan 125 Pitbike.
82 RD350LC.
82 SR250.
83 RZ350YPVS.
88 RZ250 YPVS(project).
83 FJ1100.
96 YZF750R(track bike).
99 YZF1000 R1.
00 YZF1000 R1.
72 CB750four.
Lifan 125 Pitbike.
Re: My completed 85 RZ hybrid project
Interesting and pretty.
I have tried to instal an SV650 rear wheel into an LC frame and it is too wide to fit without modifying the frame and fitting an offset sprocket. Seeing as the LC and RZ motors are essentially the same bottom end I am wondering how you got everything to fit?
I have tried to instal an SV650 rear wheel into an LC frame and it is too wide to fit without modifying the frame and fitting an offset sprocket. Seeing as the LC and RZ motors are essentially the same bottom end I am wondering how you got everything to fit?
'82 RD350LC in '81 colours, OEM pipes, UNI filters
'85 FZ750
'85 FZ750
Re: My completed 85 RZ hybrid project
love this! nice work, looks great.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: My completed 85 RZ hybrid project
Very nice bike! A nice palette of Classic Yamaha colours!
It also makes sense the RGV swingarm and GP pipes combo.
Three months in your first build leading to those results is quite an achievement in my opinion.
It also makes sense the RGV swingarm and GP pipes combo.
Three months in your first build leading to those results is quite an achievement in my opinion.
Yamaha SZR 660 '96(4SU) ---> in the process to YPVS hybrid!
-
- Posts: 699
- Joined: Mon Dec 28, 2009 12:02 am
- Location: Hartford, CT
Re: My completed 85 RZ hybrid project
Love it.
1984 RZ350 YPVS 31K
1987 RD350 A/C
2009 Husqvarna SM610
1987 RD350 A/C
2009 Husqvarna SM610
Re: My completed 85 RZ hybrid project
nice bike! thats exactly how i wish my rgv front was arranged, risers and dash and lights mounted on oem cowling. i can see a speedo sensor down there i need one of those too!
Re: My completed 85 RZ hybrid project
Thanks for the great comments and all the advice I got from you guys on this forum!!
I tried to find some RGV parts without much luck, so I went with what I could find. And the stock shock was way too soft with the different linkage on the VJ23 arm.
Hooligan,
The swingarm bushings had to be narrowed .060" per side and bored out to fit the RZ pivot bolt. Then it slipped right in place. The SV rim worked using a GS 500 sprocket cush drive with a 10mm front offset sprocket.
Charlie
Steve,RZed,
VJ22 shock works with the VJ23 swingarm,when you use the adapter brackets that bolt to the lower center stand bracket. Using the VJ23 brake calipher and bracket would allow you to get
rid of having to use the brake stay arm. Bike looks nice.
I tried to find some RGV parts without much luck, so I went with what I could find. And the stock shock was way too soft with the different linkage on the VJ23 arm.
I have tried to instal an SV650 rear wheel into an LC frame and it is too wide to fit without modifying the frame and fitting an offset sprocket. Seeing as the LC and RZ motors are essentially the same bottom end I am wondering how you got everything to fit?
Hooligan,
The swingarm bushings had to be narrowed .060" per side and bored out to fit the RZ pivot bolt. Then it slipped right in place. The SV rim worked using a GS 500 sprocket cush drive with a 10mm front offset sprocket.
Charlie
1985 RZ 421 Hybrid viewtopic.php?t=9655
99 R1 USD front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
JL GP stainless pipes
2018 XSR 900
99 R1 USD front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
JL GP stainless pipes
2018 XSR 900
Re: My completed 85 RZ hybrid project
Really nice bike love it.
You gave me a nice idea on thoseTarrozi Hi-rise clipons , I will give them a try as these should be much more comfortable when riding compared to my RGV clip ons on my 421.
Enjoy that bike.
Petros
You gave me a nice idea on thoseTarrozi Hi-rise clipons , I will give them a try as these should be much more comfortable when riding compared to my RGV clip ons on my 421.
Enjoy that bike.
Petros
- This old RZ
- Posts: 1773
- Joined: Sun Nov 27, 2005 12:04 am
- Location: So.Cal
Re: My completed 85 RZ hybrid project
Nice bike, you made quick work of her! Those are some OLD Toomey stickers on the tank.. I haven't seen those for years! I like the pipes, I also have a set.. the welding on those things are just beautiful to look at, those guys are metal artisans.
Regarding your r wheel, it seems that GS500 cush sprocket has a lot of uses,I have a FZ600 swingarm/ 1987/88 GSXR 4.5 rear wheel combo that utilizes that same GS500 cush setup. I didn't end up using it, but its all packed up in a box for the last 10 years...lol
Again nice bike enjoy...the ride
Regarding your r wheel, it seems that GS500 cush sprocket has a lot of uses,I have a FZ600 swingarm/ 1987/88 GSXR 4.5 rear wheel combo that utilizes that same GS500 cush setup. I didn't end up using it, but its all packed up in a box for the last 10 years...lol
Again nice bike enjoy...the ride
HAPPY 30th YAMAHA YVPS 350 1983-2013. DONT OVER THINK IT , JUST BUILD IT AND BE JUST AS FAST AND RELIABLE
Re: My completed 85 RZ hybrid project
Yes to what everyone else said
Do have pics of "adapting" the stock upper fairing bracket to your setup?
It sure looks great
Do have pics of "adapting" the stock upper fairing bracket to your setup?
It sure looks great
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1
Re: My completed 85 RZ hybrid project
Yes, I was running a set of the original Toomeys on my bike prior to this. Hence the "old" stickers!!Nice bike, you made quick work of her! Those are some OLD Toomey stickers on the tank.. I haven't seen those for years! I like the pipes, I also have a set.. the welding on those things are just beautiful to look at, those guys are metal artisans.
Regarding your r wheel, it seems that GS500 cush sprocket has a lot of uses,I have a FZ600 swingarm/ 1987/88 GSXR 4.5 rear wheel combo that utilizes that same GS500 cush setup. I didn't end up using it, but its all packed up in a box for the last 10 years...lol
The SV 650 cush drive was about a 1/2" wider than the GS drive and wouldn't properly align with the front sprocket. Now the chain just clears the tire. (150/17)
Thanks, I will try to take a few pics of the bracket and post them for you.Yes to what everyone else said
Do have pics of "adapting" the stock upper fairing bracket to your setup?
It sure looks great
Charlie
1985 RZ 421 Hybrid viewtopic.php?t=9655
99 R1 USD front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
JL GP stainless pipes
2018 XSR 900
99 R1 USD front end
Tarrozi Hi-rise clipons
TrailTech Endurance II Speedo/Odometer
VJ23 swingarm
CBR F4i rear shock/custom dogbones
JL GP stainless pipes
2018 XSR 900