TZR 421 from France
Moderator: rztom
-
- Posts: 31
- Joined: Sun Jan 09, 2011 7:50 am
- Location: Brittany, France
TZR 421 from France
Hi there
Etienne, 25 y.o., from Brittany: France, I ride this (home made by myself):
Specs will come later.
see ya
Etienne, 25 y.o., from Brittany: France, I ride this (home made by myself):
Specs will come later.
see ya
Last edited by etienne24II on Sun Feb 23, 2014 7:54 pm, edited 2 times in total.
- KennyBarroz
- Posts: 356
- Joined: Wed Oct 06, 2010 4:34 pm
- Location: Sweden
Thats a nice build!
Love the FMF-dirtbike silancers, had something like that myself in mind
Looks great, any movies?
Love the FMF-dirtbike silancers, had something like that myself in mind
Looks great, any movies?
RD350 F2 -87: SETUP :
Stock 65mm barrels, TSS YPVS kit, 0,9squish, Vforce3 reeds, stock intake for Vforce3 reeds, 28mm PWK custom made for oilpump and vacuum line, jets 120/40, modified airbox, Zeeltronic PCDI-10V - Custom curve
Stock 65mm barrels, TSS YPVS kit, 0,9squish, Vforce3 reeds, stock intake for Vforce3 reeds, 28mm PWK custom made for oilpump and vacuum line, jets 120/40, modified airbox, Zeeltronic PCDI-10V - Custom curve
-
- Posts: 31
- Joined: Sun Jan 09, 2011 7:50 am
- Location: Brittany, France
-
- Posts: 31
- Joined: Sun Jan 09, 2011 7:50 am
- Location: Brittany, France
hi there, I put some old stuff
after a crash last year at a track day, this year, I decided to refresh it , pics will comes later
It also has a little sister, not finished yet
SDR 200 with YZ 250 engine enjoy:
http://imageshack.us/photo/my-images/83 ... 12172.jpg/
after a crash last year at a track day, this year, I decided to refresh it , pics will comes later
It also has a little sister, not finished yet
SDR 200 with YZ 250 engine enjoy:
http://imageshack.us/photo/my-images/83 ... 12172.jpg/
Nice bike! Congratulations!
It is based on a TZR 125 4DL Belgarda, right?
What was your criteria based on, regarding the three axis alignment? (sprocket-swingarm-rear wheel)
Which was the most difficult task in order to fit the engine into the frame?
Is the engine cradle made of aluminium, or steel?
I would appreciate some detail pictures of it, please.
Thanks in advance
It is based on a TZR 125 4DL Belgarda, right?
What was your criteria based on, regarding the three axis alignment? (sprocket-swingarm-rear wheel)
Which was the most difficult task in order to fit the engine into the frame?
Is the engine cradle made of aluminium, or steel?
I would appreciate some detail pictures of it, please.
Thanks in advance
Thank you, Kenny, for your input and patience because I need to ask you some more questions before ordering some pipes...
I'm afraid of ordering from overseas due to the much higher shipping charges and custom fees.
I'm thinking about fitting your stainless pipes on this bike, but I guess this could turn into a shoddy work. What's your opinion?
I'm afraid of ordering from overseas due to the much higher shipping charges and custom fees.
I'm thinking about fitting your stainless pipes on this bike, but I guess this could turn into a shoddy work. What's your opinion?
-
- Posts: 31
- Joined: Sun Jan 09, 2011 7:50 am
- Location: Brittany, France
kenny wrote:That looks like a bike built by Seb a few years ago.
I started track racing with this:
YZ 250 engine
And then I met Seb, we talked about bigger engine on TZR frame, he smiled, and told me he has already done it...
now I have two 4DL, one 125 (the one above on the picture downgraded on 125cc) and one 385cc
This 250 YZ is now on this (not finished):
Enjoy
-
- Posts: 31
- Joined: Sun Jan 09, 2011 7:50 am
- Location: Brittany, France
Hi there! News for 2012,
After a crash last year, I changed a bit the look of my bike, and changed for an adapted R1 fork with 3" tzr 125 4FL front wheel, single 320mm disc.
Fairing is from TZ 250 1990, seat from TZ 350 1980.
I started the season with the French LC's 350 club :
http://www.youtube.com/watch?v=zjLEiwbj1GI
See ya
After a crash last year, I changed a bit the look of my bike, and changed for an adapted R1 fork with 3" tzr 125 4FL front wheel, single 320mm disc.
Fairing is from TZ 250 1990, seat from TZ 350 1980.
I started the season with the French LC's 350 club :
http://www.youtube.com/watch?v=zjLEiwbj1GI
See ya
- aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia