collars for bikini fairing

General forum on fairings, seats, tanks, tail sections, painting and other bodywork modifications

Moderator: rztom

Post Reply
Message
Author
gpaddict
Posts: 643
Joined: Mon Nov 06, 2006 8:35 pm
Location: WISCONSIN

collars for bikini fairing

#1 Post by gpaddict » Fri Oct 13, 2017 9:11 pm

Hey guys, since the collars for the mounts on the bottom fairing (p/n 90387-06701-00) are nla, I was going to spin some up. I don't have any in my possession, and was wondering if somebody could give me the dimension of this part? Thanks, Bruce.
tuned to Paris Hilton specs............rich and retarded!

hablair
Posts: 137
Joined: Fri Mar 18, 2016 6:20 am

Re: collars for bikini fairing

#2 Post by hablair » Wed Oct 18, 2017 7:31 am

Which model bike, bikini fairing or full fairing?

I might be able to help

gpaddict
Posts: 643
Joined: Mon Nov 06, 2006 8:35 pm
Location: WISCONSIN

Re: collars for bikini fairing

#3 Post by gpaddict » Wed Oct 18, 2017 9:17 am

Bikini for the 85 U.S. model. Thank you.
tuned to Paris Hilton specs............rich and retarded!

hablair
Posts: 137
Joined: Fri Mar 18, 2016 6:20 am

Re: collars for bikini fairing

#4 Post by hablair » Wed Oct 18, 2017 10:43 am

ok so they are the ones that fit inside the rubber grommets on the belly pan, yes?

ASFAIK the ferrules are the same size as the tail light ones

I don't get home until Saturday morning, i will have a look for you and report back

Howard

hablair
Posts: 137
Joined: Fri Mar 18, 2016 6:20 am

Re: collars for bikini fairing

#5 Post by hablair » Wed Oct 18, 2017 10:46 am

Actually, doesn't the M6 large head screw that holds the belly pan on have a collar that fits in the grommet to stop crushing the plastic

Not sure even now if there is a grommet on the belly pan on that model, however I'll still check for you

Howard

justind97
Posts: 202
Joined: Mon Aug 10, 2015 8:57 pm
Location: Ottawa, Canada

Re: collars for bikini fairing

#6 Post by justind97 » Thu Oct 19, 2017 6:34 pm

If you can get me a picture or dimensions of what you need, I just pulled a few out of one of my parts bins. Just pay postage

gpaddict
Posts: 643
Joined: Mon Nov 06, 2006 8:35 pm
Location: WISCONSIN

Re: collars for bikini fairing

#7 Post by gpaddict » Thu Oct 19, 2017 7:24 pm

Thanks justind97, lets see if we get some dimensions.
tuned to Paris Hilton specs............rich and retarded!

hablair
Posts: 137
Joined: Fri Mar 18, 2016 6:20 am

Re: collars for bikini fairing

#8 Post by hablair » Sat Oct 21, 2017 9:14 am

Ok the collar that is inside the grommet on the fully faired RZ or F1 is M6 ID x M8 OD x 8mm long

the screw I took out of the belly pan on my 31K LC2 or bikini faired RZ has thread size of M6 and is 100mm long in the thread, there is then a shank that is above the thread that is 10mm in dia, this fits in the mounting hole of the "bikini bottom" belly pan the head of the screw is a large head Phillips that is 18mm dia

There was no grommet in my bikini belly pan, only in the F1 version

that's not to say there should be one there and the screw I took out just happened to fit,

Sorry no pics as PBKT is FKD

HTH

Howard

gpaddict
Posts: 643
Joined: Mon Nov 06, 2006 8:35 pm
Location: WISCONSIN

Re: collars for bikini fairing

#9 Post by gpaddict » Sat Oct 21, 2017 12:45 pm

Ok, thank you very much Howard for checking this out and giving me a response. Thanks again.

Bruce.
tuned to Paris Hilton specs............rich and retarded!

Post Reply