VHT gloss clear engine enamel

General forum on fairings, seats, tanks, tail sections, painting and other bodywork modifications

Moderator: rztom

Post Reply
Message
Author
User avatar
motosapien
Posts: 396
Joined: Tue Aug 26, 2014 2:27 am
Location: Scottsdale, Arizona

VHT gloss clear engine enamel

#1 Post by motosapien » Sat Jan 31, 2015 4:20 am

Tried this on the cylinders.... hope it works
Attachments
10966594_889021751118750_1867251161_n.jpg
10966594_889021751118750_1867251161_n.jpg (102.77 KiB) Viewed 1313 times
2>4
Top
vmxwinn
Posts: 469
Joined: Sat Jan 28, 2012 3:39 pm
Location: Danville CA

Re: VHT gloss clear engine enamel

#2 Post by vmxwinn » Sat Jan 31, 2015 5:09 am

It should work well. I did use VHT Clear on a Bultaco cylinder head once and it turned yellowish.
85 Y/B, Toomey pipes, PWK 28's, JJH Needle #2, 45 pilot jet, 145 main, Pods, VForce 4 reed blocks, +3 ignition, Milled head 1.1mm squish, R6 Shock, Progressive

Many Vintage MX Bikes, 03 ZRX1200R, 86 Moto Guzzi 1000 Le Mans MK IV, 86 VFR 750, 74 GT 550
Top
hondaror
Posts: 2828
Joined: Mon Mar 03, 2014 8:44 pm
Location: Alberta, Canada

Re: VHT gloss clear engine enamel

#3 Post by hondaror » Sat Jan 31, 2015 5:20 am

As long as it's high heat, you're ok.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Top
User avatar
motosapien
Posts: 396
Joined: Tue Aug 26, 2014 2:27 am
Location: Scottsdale, Arizona

Re: VHT gloss clear engine enamel

#4 Post by motosapien » Sat Jan 31, 2015 1:43 pm

it does say high heat.... hope it works
2>4
Top
Post Reply

Return to “Bodywork”