Turn signal switch
Moderator: rztom
-
- Posts: 514
- Joined: Tue Jan 24, 2006 6:35 pm
- Location: Kansas City, MO
Turn signal switch
I think there may be an issue with my turn signal switch on the RZ. When I push it to L or R it blinks for a second then returns to the middle. If I hold the switch in position then it continues to blink until I let go. Would this be the Switch or something else?
85 RZ350-Messed up wiring
Re: Turn signal switch
The switch does move back to the center, you stop it flashing by pushing the knob down. The auto cancel might be causing this to happen on yours but its simple to whip the switchblck off and clean it up and see if its improved.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
-
- Posts: 514
- Joined: Tue Jan 24, 2006 6:35 pm
- Location: Kansas City, MO
Re: Turn signal switch
I understand that piece. What I'm saying is that in order for the light to blink I have to hold it in the L or R position. As soon as I let go it stops.
85 RZ350-Messed up wiring
Re: Turn signal switch
ok, what i am saying is that it could be the auto cancel thats your problem, but cleaning the switch might help keep the switch contact. Connect another switch if you want a quick test.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: Turn signal switch
I have had the same problem for years. Silverstrom explained that the system is controlled from inside the Speedo. To pull the speedo apart and fit is beyond my ability. I think that if one puts a time delay switch in the loom I am sure that will fix the problem. I am not good at electrical stuff, but I am sure some one can come up with the solution?
Re: Turn signal switch
That is only part of the system Spook, thats the distance part, the other is time and its controlled from a box plugged into the loom.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com