Stator Grommet Installation
Moderator: rztom
Stator Grommet Installation
Dove into cleaning this weekend and noticed that the Stator Grommet on our 1984 RZ350 has torn. I'm OCD and can't have this nor do I want to risk water getting in there.
Went ahead and ordered a replacement from HVC - http://www.hvccycle.net/yamaha-rd-r5-rz ... hvc200152/" onclick="window.open(this.href);return false;
Any tips on installing this thing? I haven't received to the part to check out the rubber, but maybe a turkey baster and a lot of lube to slide over the plugs? I really don't want to remove the plugs...
Went ahead and ordered a replacement from HVC - http://www.hvccycle.net/yamaha-rd-r5-rz ... hvc200152/" onclick="window.open(this.href);return false;
Any tips on installing this thing? I haven't received to the part to check out the rubber, but maybe a turkey baster and a lot of lube to slide over the plugs? I really don't want to remove the plugs...
Re: Stator Grommet Installation
remove the plugs... its the only way, sorry.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: Stator Grommet Installation
You should be able to get a tiny flat screwdriver in the plug and push bag the spur on the spade clip for each wire. Slip them through the grommet and reattach to the plug!
Re: Stator Grommet Installation
Lol there was a thread about this cple mnths ago. Have done 2 of these & as Jon said,you have to remove the plug.
But apparently there is a tool you can buy to help remove the prongs.
But apparently there is a tool you can buy to help remove the prongs.
Re: Stator Grommet Installation
Lisle makes a tool, check amazon, its good value on there (set of 3 in a box)
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: Stator Grommet Installation
That's what I was afraid of. Thanks for the info on the tool!
Re: Stator Grommet Installation
Is the tool really necessary? I found an tiny electronics screwdriver worked fine. I think it had a 1.0mm or 1.2mm tip.
Re: Stator Grommet Installation
you can do it with pins even, but... the tool makes it easier on your hands and means it takes less time...
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
-
- Posts: 107
- Joined: Sun Jul 14, 2013 8:38 pm
- Location: Eden Prairie, MN
Re: Stator Grommet Installation
Does anyone know the part number for this electrical connector pin extraction tool from Lisle? I checked amazon and there are several different tools available without specifications as to what size pins that it fits or removes? I'm trying to replace the stator and can's seem to get the pins out of the factory plug connections.
Thanks
Thanks
Re: Stator Grommet Installation
I bought mine @ radio shack.
84 RZ350 Spec II boost ports shaved head
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl