RZ CDI boxes

General forum on troubleshooting electrical problems and modifications to electrical systems

Moderator: rztom

Post Reply
Message
Author
vmx51
Posts: 113
Joined: Mon Dec 12, 2011 11:43 am

RZ CDI boxes

#1 Post by vmx51 » Mon Apr 27, 2015 5:26 pm

How many differeny OEM CDI boxes are thier for RZ350s ???
Top
User avatar
JonW
Posts: 10605
Joined: Sat Oct 10, 2009 4:33 am
Location: Sydney
Contact:
Contact JonW

Re: RZ CDI boxes

#2 Post by JonW » Mon Apr 27, 2015 8:45 pm

loads... and some TZRs will work on the RZ as a mate here has one on his, so perhaps even others... I think these things are quite simple, so almost any similar configured bike's unit might work.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid

Like Watches? www.PloProf.com & www.DeskDivers.com
Top
seahorse
-----
-----
Posts: 1352
Joined: Sun Sep 11, 2011 7:25 pm
Location: Perth Western Australia

Re: RZ CDI boxes

#3 Post by seahorse » Fri May 01, 2015 9:15 am

Not all stator flywheel combinations will work with all cdi,s
There is information written on this forum with regards to what works with what I think it was posted up a few years ago by silver Stromboli
Very helpful it has been over the years thank you again longjohn
81 RD 250 LC Hybrid .Widened frame with Aprilia RS250 Back end & Front end, strokd RZ 421, Kennys TSA's, 31KVM26SS Carbs M-360 P-25 ALBA Ndl Pos 3, Air 1.3/4
81Rd350lc resto 2016
81 Rd250lc resto 2017
1999 ZRX 1100
Top
silverstrom
Moderator
Moderator
Posts: 7038
Joined: Wed Mar 24, 2010 2:20 am

Re: RZ CDI boxes

#4 Post by silverstrom » Fri May 01, 2015 10:46 pm

3CDIs 29K-50, 52Y-50, 1UA-50. 3 Stators, 3 Flywheels. 83-84, then 85, then 86-90.

None are directly interchangeable without wiring modifications. Some combinations will work.

TZR CDIs may work, but not as intended. The TZR ignition curve is different.
Top
Post Reply

Return to “Electrical & Wiring”