RD350LC Cyl Head
Moderators: rztom, silverstrom
- Stankflapper
- Posts: 126
- Joined: Sat Oct 13, 2012 3:54 pm
- Location: Brisbane. Aust
RD350LC Cyl Head
I have just purchased a secondhand RD350LC cylinder head and I am wishing to check the thickness to see if it has been previously machined. Does anyone have the standard thickness measurement please?
RD350LC/ Rz350 Kenny Roberts/Rd350LC hybrid FZR/RGV250/WR450/RM500/Ducati1198S/1250SBandit/RZV500/Kawasaki H2
Re: RD350LC Cyl Head
Just look at it's head surface.
There is a lip edge betwixt head face and combustion chamber.
IF still there it's oem.
That said; IF mine, first thing would be to have it shaved off
There is a lip edge betwixt head face and combustion chamber.
IF still there it's oem.
That said; IF mine, first thing would be to have it shaved off