Pre-mix oil Bardahl
Moderator: rztom
Pre-mix oil Bardahl
Located a bottle of 100% Bardahl syth injection oil yesterday. Only found more in the UK under KGR Bardahl two stroke oil that was close. Anything comperable in Canada/US for purchase?
- Attachments
-
- IMG_2728.JPG (141.21 KiB) Viewed 2777 times
Re: Pre-mix oil Bardahl
That one is packaged for sale in Canada, French and Metric on the label. I've never come across Bardahl myself but in Ontario Motul 710 and Amsoil Interceptor are easy to come by. Best to stick with something readily available in your area.
- T.RexRacing
- Posts: 1318
- Joined: Fri Nov 01, 2013 8:34 pm
- Location: back in the hills
Re: Pre-mix oil Bardahl
I've had great results with Amsoil Interceptor for the pump as well as BelRay H1R in premix. Haven't seen Bardahl in decades. It was good stuff back then.
There is only one difference between a madman and me. The madman thinks he is sane. I know I am mad.
Salvador Dali
Salvador Dali
- pushstartrearset
- -----
- Posts: 1339
- Joined: Thu Mar 17, 2011 4:20 pm
- Location: Vancouver, WA
Re: Pre-mix oil Bardahl
Along w/ what T.Rex & RuZty said, Motul 800 is also widely used in a lot of two strokes (seen many recommendations for this oil). Amsoil I like and have run for years, keeps the exhaust port really clean. I even run Amsoil Saber Professional in the injector (JASO-FD rating) in both the RZ and RD350.
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.
- T.RexRacing
- Posts: 1318
- Joined: Fri Nov 01, 2013 8:34 pm
- Location: back in the hills
Re: Pre-mix oil Bardahl
In my experience Motul is good oil but overpriced and more than a little over rated. 800 is not JASO rated,in fact it is not even submitted. The data sheet simply (and evasively) states exceeds all standards but gives no numbers or standards to back the claim. Using this on a new bike could result in warranty issues should there be problems.
Must admit publicly I've had poor experiences with their 4 stroke stuff that led to further investigation and distaste for their products.
Must admit publicly I've had poor experiences with their 4 stroke stuff that led to further investigation and distaste for their products.
There is only one difference between a madman and me. The madman thinks he is sane. I know I am mad.
Salvador Dali
Salvador Dali
- pushstartrearset
- -----
- Posts: 1339
- Joined: Thu Mar 17, 2011 4:20 pm
- Location: Vancouver, WA
Re: Pre-mix oil Bardahl
And Amsoil is 1/2 the price. Win-win all around. $11 bucks locally for Amsoil Saber Professional from Costless Auto Parts. At least my bikes feel smoother when i run this oil from a cheaper oil, say Honda GN2 or yamalube 2S (which stinks like hell).
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.