Page 2 of 2

Re: All Balls , bearing conv kit question.

Posted: Sun Nov 20, 2016 10:16 pm
by 2bang
Gonna do just that!
Soon as I have a chance....

Its mostly a matter of breaking it free initially...
So just chisel carefully...
I saw a vid of it on 'tube.. by one of the major parts outlets... they used store bought expensive tools for every other operation... so chisel on race is considered kosher..

Thanks!

Re: All Balls , bearing conv kit question.

Posted: Sun Nov 20, 2016 10:25 pm
by hondaror
Just nudge hard, no hacking needed.

Re: All Balls , bearing conv kit question.

Posted: Wed Nov 30, 2016 1:42 am
by evso
If you run a bead around the center of the race with a mig welder, the race contracts when the weld cools and if it doesnt just pop out, it will come out with the gentlest of taps with a chisel etc.

Re: All Balls , bearing conv kit question.

Posted: Thu Dec 01, 2016 1:10 am
by hondaror
evso wrote:If you run a bead around the center of the race with a mig welder, the race contracts when the weld cools and if it doesnt just pop out, it will come out with the gentlest of taps with a chisel etc.
I've done this. Very slick.