gas tank needed
gas tank needed
I am in need of a tank for an rdlc mine is badly rusted and i am getting tired of painting it up only to have it blister the paint with a new pinhole a year later. There is a guy on ebay offering made in india tanks but i have heard nothing about the quality of these. Anyone have any insight into these aftermarket tanks or know of a solid rdlc tank for sale.
- two-stroke-brit
- -----
- Posts: 1701
- Joined: Fri Nov 22, 2013 10:49 pm
- Location: Houston texas
Re: gas tank needed
the guys on the UK forum have nothing but bad reviews about the India LC tanks .
which is a shame because a aluminium replacement would be great.
good luck mark
which is a shame because a aluminium replacement would be great.
good luck mark
350LC,Athena 392 big bore,stock porting,swiss cheese air box,stock reeds,spec11 pipes.(now TSA big bore pipes)
She might not be pretty but she will always be a fun ride
1982 YAMA RD350LC
98KDX 220R
1967 TRIUMPH TIGER
2001 TRIUMPH TT600
She might not be pretty but she will always be a fun ride
1982 YAMA RD350LC
98KDX 220R
1967 TRIUMPH TIGER
2001 TRIUMPH TT600
Re: gas tank needed
Im always amazed when newbies say theyve never read anything about the quality of these Indian tanks, its all over the RD/RZ forums as to how bad they are :/
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: gas tank needed
this is the only rd/rz forum i go on and i have yet to find any report that involves first hand experience. i am always a little skeptical of opinions on the internet.but i do have to agree it sounds as if the fit and finish may be far below what the price point may suggest.
Re: gas tank needed
These tanks were made with such thin gauge steel that it's no wonder many resemble a sieve now
If the rust is only on the bottom corners then maybe a solder repair and then use POR 15 tank sealer
If the rust is only on the bottom corners then maybe a solder repair and then use POR 15 tank sealer
Cryin' In The Beer Of A Drunk Man
Re: gas tank needed
my one tank had a liner which had to be removed as it was coming apart now i have pinholes blistering my new paint job all over . i am not sure it is worth trying to save it. that is the only reason i would consider the indian tanks . my other tank well i soldered up three bad spots and painted it for the third time who knows the last time it took a year for it to blister the paint. if these bikes were not so much damn fun to ride i would have flogged it by now, but these two strokes are so addictive.
Re: gas tank needed
I have lined 5 tanks in as many years.
The first tank I did failed after a year,that may have been the product or the operator.
The last 4 tanks I have lined with KBS gold
Set aside half the day to properly do the job.
You will need a hairdryer for the in-between drying stage.
Done correctly KBS gold will work.
The first tank I did failed after a year,that may have been the product or the operator.
The last 4 tanks I have lined with KBS gold
Set aside half the day to properly do the job.
You will need a hairdryer for the in-between drying stage.
Done correctly KBS gold will work.
81 RD 250 LC Hybrid .Widened frame with Aprilia RS250 Back end & Front end, strokd RZ 421, Kennys TSA's, 31KVM26SS Carbs M-360 P-25 ALBA Ndl Pos 3, Air 1.3/4
81Rd350lc resto 2016
81 Rd250lc resto 2017
1999 ZRX 1100
81Rd350lc resto 2016
81 Rd250lc resto 2017
1999 ZRX 1100
- two-stroke-brit
- -----
- Posts: 1701
- Joined: Fri Nov 22, 2013 10:49 pm
- Location: Houston texas
Re: gas tank needed
could a person with a trash tank cut the bottom out and make a former to mold the sheet ali to.
i know very little about the dark art of sheet metal forming.
how would you build the former?. my guess would be a basic shape out of wood and and then bondo to final shape.(one for the top and one for the base)
i have a donor tank and will have a go at this if i can get a reasonable plan .
i know an excellent welder .
what thickness ali sheet do you think? 1/16 ?
i think the knee cutouts would be made separately then welded in.
a winter project for when its cooler in the garage i think, roll on november.
i know very little about the dark art of sheet metal forming.
how would you build the former?. my guess would be a basic shape out of wood and and then bondo to final shape.(one for the top and one for the base)
i have a donor tank and will have a go at this if i can get a reasonable plan .
i know an excellent welder .
what thickness ali sheet do you think? 1/16 ?
i think the knee cutouts would be made separately then welded in.
a winter project for when its cooler in the garage i think, roll on november.
350LC,Athena 392 big bore,stock porting,swiss cheese air box,stock reeds,spec11 pipes.(now TSA big bore pipes)
She might not be pretty but she will always be a fun ride
1982 YAMA RD350LC
98KDX 220R
1967 TRIUMPH TIGER
2001 TRIUMPH TT600
She might not be pretty but she will always be a fun ride
1982 YAMA RD350LC
98KDX 220R
1967 TRIUMPH TIGER
2001 TRIUMPH TT600
Re: gas tank needed
Not understanding.
I have 2 LC tanks that are Structurally Pristine (both have Bikes attached
Odd to me some have tanks that resemble Collanders. I've never seen one.
I have 2 LC tanks that are Structurally Pristine (both have Bikes attached
Odd to me some have tanks that resemble Collanders. I've never seen one.
Re: gas tank needed
with over 180,000 km on the old girl my rd has been ridden hard and apparently put away wet.Bare wrote:Not understanding.
I have 2 LC tanks that are Structurally Pristine (both have Bikes attached
Odd to me some have tanks that resemble Collanders. I've never seen one.
Re: gas tank needed
LOL you are the exception that proves the rule bare, but we knew thatBare wrote:Not understanding.
I have 2 LC tanks that are Structurally Pristine (both have Bikes attached
Odd to me some have tanks that resemble Collanders. I've never seen one.
Someone could use the bottom half of the one I cut up as a mould if they liked, but the top half was a bit too battered so doesnt have the shape you want lol
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
-
- Posts: 104
- Joined: Tue Dec 06, 2011 7:13 am
- Location: West Aust
Re: gas tank needed
There were a few Fibreglass tanks being sold in Oz for rd250/350lc's a while back.
Also there were tanks being offered made in the UK for about 370 pounds a few years back.
Legend m/c had them on eBay.
Every second lc owner has or will have tank problems so if somebody comes up with a decent replacement
there will be a market for them!
Also there were tanks being offered made in the UK for about 370 pounds a few years back.
Legend m/c had them on eBay.
Every second lc owner has or will have tank problems so if somebody comes up with a decent replacement
there will be a market for them!
Re: gas tank needed
Legend found there was no market for their tanks and discounted to move em on...
FYI In some places GRP tanks are not legal for road use, I expect Aus is in that list LOL
I found (like Dan @ Legend) when I thought about doing this that everyone wants one, but no one will actually pay what they cost. Even when you know the cost of a tank, repair, liner, paint, decals it seems people still dont see the value in paying it all up front for a new one. I cant fathom it, but it happens everytime. I hope one day someone proves me wrong... and yes... I dare ya! :)
FYI In some places GRP tanks are not legal for road use, I expect Aus is in that list LOL
I found (like Dan @ Legend) when I thought about doing this that everyone wants one, but no one will actually pay what they cost. Even when you know the cost of a tank, repair, liner, paint, decals it seems people still dont see the value in paying it all up front for a new one. I cant fathom it, but it happens everytime. I hope one day someone proves me wrong... and yes... I dare ya! :)
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com