My TZR250

Message

KR-RZ350 · #1 Post by **KR-RZ350** » Sat Sep 01, 2012 11:00 pm

I have always wanted one so when the opportunity to get a Colorado titled/registered 3ma came up, I jumped on it

Look what followed me home

Some work needed but its TITLED

nokturnal · #2 Post by **nokturnal** » Sat Sep 01, 2012 11:16 pm

That's hot...

Joken · #3 Post by **Joken** » Sat Sep 01, 2012 11:51 pm

Jealous...for sure

silverstrom · #4 Post by **silverstrom** » Sat Sep 01, 2012 11:55 pm

Beautiful bike Rei.

KR-RZ350 · #5 Post by **KR-RZ350** » Sun Sep 02, 2012 2:21 am

Thanks
The shear amount of hoses running around this thing is not beautiful at all. I want to get to the carbs and to do so you need to drain the coolant and remove the radiator so you can get the airbox off

Rei

silverstrom · #6 Post by **silverstrom** » Sun Sep 02, 2012 3:22 am

Do you have the rest of the front fairings?

Rizzer · #7 Post by **Rizzer** » Sun Sep 02, 2012 7:42 am

V. nice bike

If i bought another 2T it would have to be one of these, but they are never available, much like the vj23 suzuki that I will never have a chance at owning...

RuZty · #8 Post by **RuZty** » Sun Sep 02, 2012 8:58 am

I have a frame and tank for one, but that's as close as I'll get. One of the best strokers there for sure, nice find!

Benno #03 · #9 Post by **Benno #03** » Sun Sep 02, 2012 9:24 am

Sweet Bike, Best looking 2T Ever.
Rizzer, if you haven't already check out Import Monster.
They have quite a few and freight isn't silly money.
On my Christmas list for sure...

Rizzer · #10 Post by **Rizzer** » Sun Sep 02, 2012 9:57 am

Benno #03 wrote: Rizzer, if you haven't already check out Import Monster.
They have quite a few and freight isn't silly money.
On my Christmas list for sure...

not joking/ I sent an email the other day asking how much, im waiting on a reply

KR-RZ350 · #11 Post by **KR-RZ350** » Mon Sep 03, 2012 11:26 am

Do you have the rest of the front fairings?

Yup. Came with brand new set of chinese ebay fairings(very thin ABS) + OE fairings(2 sets of tail pieces)

Richie Rich · #12 Post by **Richie Rich** » Tue Sep 04, 2012 6:50 am

Nice bike mate! Congrats on the purchase. Hope it's not too different or difficult to work on than the RZ...

neroneuman · #13 Post by **neroneuman** » Thu Sep 13, 2012 1:20 pm

Congratulations, very nice bike

KR-RZ350 · #14 Post by **KR-RZ350** » Sun Sep 16, 2012 7:30 pm

Richie Rich wrote:Nice bike mate! Congrats on the purchase. Hope it's not too different or difficult to work on than the RZ...

Carbs are a pain to take off if you need to change or adjust the needles but the mains are easy to get to(as long as the fairing is off). Very hard to adjust the right carbs air screw.