Yellow and Black RZ's RZ. (S10RZ350)

Message

Yellow and Black RZ · #1 Post by **Yellow and Black RZ** » Thu Jan 03, 2008 5:04 pm

Here's a bunch of mine. No particular order and at various stages of development.

Purchased in the early 90's. Second owner, only motorcycle I've ever owned. When I was 10 (1985) I saw my bike in the parking lot of what eventually was my High school. Jump to 10 years later, I bought the bike STOCK with 12,800 miles for $1000. It now has anywhere from 30-40,000 miles on "it".
I totaled the bike in Hollywood Ca. due to a left turning cager. The bike is now on its 4th rebuild (2 stock, 1 mid 90's gsxr susp, 1-'06 susp (current)).

Video:

Lomas with single 35mm carb (tuned RICH) driveby:

http://www.youtube.com/watch?v=0AUu2N87H1g

xen-uno · #2 Post by **xen-uno** » Thu Jan 03, 2008 8:01 pm

Ya man ... my favorite non-faired bike. I've got a line on some '06-'07 GSXR600 (or 750 ... they're the same) wheels too. We'll have twins damn near.

Have you arrived at an accurate offset number for the front sprocket yet?

PS: Where's my USD's?

(shipping address revised)

edit: Do you have a scale there? What does the complete GSXR rear wheel (with tire and cush hub) weigh compared to the stock rear wheel similarly equipped? 'Zuk front too if you take it off relatively soon.

Yellow and Black RZ · #3 Post by **Yellow and Black RZ** » Thu Jan 03, 2008 8:43 pm

xen-uno wrote:Ya man ... my favorite non-faired bike. I've got a line on some '06-'07 GSXR600 (or 750 ... they're the same) wheels too. We'll have twins damn near.

Have you arrived at an accurate offset number for the front sprocket yet?

PS: Where's my USD's? (shipping address revised)

edit: Do you have a scale there? What does the complete GSXR rear wheel (with tire and cush hub) weigh compared to the stock rear wheel similarly equipped? 'Zuk front too if you take it off relatively soon.

Sorry Xen. With the holidays and family etc.. I spoke to soon about getting that out to you. I'll get you your FE in the mail next week.

I haven't really been in the project much lately. Unfortunately I also picked up an R/C heli recently. Lets see how many other ways I can come up with to suck up cash. lol.

mikee · #4 Post by **mikee** » Sun Jan 20, 2008 3:26 pm

hi, nice bike

how's it run with the single carb ?

mike

Yellow and Black RZ · #5 Post by **Yellow and Black RZ** » Sun Jan 20, 2008 3:29 pm

mikee wrote:hi, nice bike

how's it run with the single carb ?

mike

hi, Thanks.

With the Microns.. Tons of bottom end. Wish I put it on the dyno.
With Lomas it was pretty damn quick but I'm sure something was missing since they are a top end pipe.