Good with a camera? Post pics of your favorite 2-stroke here!
Moderator: rztom
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#1
Post
by acormier7 » Wed Jan 02, 2008 8:48 pm
Not much to look at yet but hope to be done by the spring. Just put the
engine together with new pistons and crank.
[/url]
Art in Peterborough
-
TCRZ88
- Posts: 779
- Joined: Thu Nov 08, 2007 4:47 pm
- Location: Cambridge, Ontario
#2
Post
by TCRZ88 » Wed Jan 23, 2008 8:15 pm
Hey Art, is that the R1 front end you got in Niagara? How difficult was it to put on? Any plans for the rear? I would like to replace my swing arm to accomodate a wider wheel. Not sure where to look. Still have that Center stand?
Tim
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#3
Post
by acormier7 » Wed Jan 23, 2008 9:02 pm
The R1 front end was pretty easy. 5mm spacer under the bottem bearing
and use Kawi Hi bearing set, I'll post the All Balls part#. I'm using a FZ600 swinger, should take 160/60/17 tire. I desided to use the center stand.
Art in Peterborough
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#4
Post
by acormier7 » Thu Feb 07, 2008 3:12 pm
Art in Peterborough
-
RICEBURNER
- Posts: 75
- Joined: Mon Jun 12, 2006 10:51 pm
- Location: Ontario Canada
#5
Post
by RICEBURNER » Thu Feb 07, 2008 11:03 pm
Art,
Couldn't help but chuckle at the pics. Project progressing from the "workmate" to the CT hoist :P So familiar.
Love the look of the raised bars and triple clamp. Hope your cable lenghts don't become a bastard to deal with.
RB
-
fightin-ry
- Posts: 28
- Joined: Sun Oct 05, 2003 10:39 pm
- Location: Little Britain, Ontario, Canada
#6
Post
by fightin-ry » Thu Mar 06, 2008 11:16 pm
The first RZ up here and a fighter also, I thought I was the only one.
Where are you getting your machine work done?
Cheers
92' GSXR 1100 Fighter--88' GSXR 7/11 Fighter--85' RZ 350 Fighter--93' PW 80 Stunt Bike
-
RICEBURNER
- Posts: 75
- Joined: Mon Jun 12, 2006 10:51 pm
- Location: Ontario Canada
#7
Post
by RICEBURNER » Fri Mar 07, 2008 12:50 am
Hey fightin-ry,
First off.....where the hell is Little Briton :?. I have done all my owm machine work however many of the mods don't require anything more than off the shelf parts, a dremel tool, metal file, and a steady hand.
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#8
Post
by acormier7 » Fri Mar 07, 2008 8:28 am
fightin-ry,
I work in a machine shop in Peterbough. We'll have to hook up the summer, if I get this thing done.
Art in Peterborough
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#9
Post
by acormier7 » Sat Mar 08, 2008 9:33 am
Just an update.
The silencers are way too cloce to the FZ swing arm. I guess I have to cut then half way through the pipe, bend them where I want them and reweld them.
Art in Peterborough
-
fightin-ry
- Posts: 28
- Joined: Sun Oct 05, 2003 10:39 pm
- Location: Little Britain, Ontario, Canada
#10
Post
by fightin-ry » Wed Mar 12, 2008 10:37 pm
I have to get mine out this year, it's been 3 years since I've ridden the gix 11 and the RZ has been a project for 7.
Where did you get the bushings for you R1 shock? I'm putting a R6 in mine and can't seam to find them.
Cheers
92' GSXR 1100 Fighter--88' GSXR 7/11 Fighter--85' RZ 350 Fighter--93' PW 80 Stunt Bike
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#11
Post
by acormier7 » Thu Mar 13, 2008 7:14 am
McMaster Carr what of the U.S. If you can wait a mounth or so I'll be ordering again and can order you a pair. They're only $2.00 ea. I think.
Art in Peterborough
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#12
Post
by acormier7 » Sun Jun 01, 2008 10:46 am
Just got the body parts back from the painters. He did a great job. Fairing bracket still need's to be modded to fit the R1 front end and a few other thing's and it's ready to roll. Thanks for everyones help.
Art
Art in Peterborough
-
Smoker
- Posts: 4783
- Joined: Sun Mar 23, 2008 8:08 pm
#13
Post
by Smoker » Sun Jun 01, 2008 11:52 am
Looks sweet!
Will you be able to fit the OEM front fairing?
-
acormier7
- Posts: 148
- Joined: Mon Oct 08, 2007 10:30 am
- Location: Peterborough Ont. Canada
-
Contact:
#14
Post
by acormier7 » Sun Jun 01, 2008 12:30 pm
Smoker wrote:Looks sweet!
Will you be able to fit the OEM front fairing?
Yes the fairing will fit. I have to modify the bracket. I should have it done later this week.
Art
Art in Peterborough
-
Dave
- Posts: 46
- Joined: Tue Oct 07, 2003 9:48 am
- Location: Montreal Qc
#15
Post
by Dave » Sun Jun 01, 2008 12:43 pm
I Art ,
Where did you find the clear clutch cover???????
I would like to have one...
Dave