Just Pics
Moderator: rztom
-
silverstrom
- Moderator
- Posts: 7038
- Joined: Wed Mar 24, 2010 2:20 am
Just Pics
Went riding with some friends today. Our Blue Haze 2013 run up 511 to Calabogie. Fantastic road. Stopped at Calabogie Motorsports Park to watch the wealthy folks hammer their Porsches around the track.
-
aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
Re: Just Pics
nice..... followed a beautiful porsche just the other day.... wound my window down to hear that swwwwweeeettt note... he floored it and echoed away... loved it
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
Re: Just Pics
Nice group of bikes there. You guys do a bit of bike swapping on your ride? I'm asking cause I know you bought that 250 Gamma over the Winter. Curious as to how the ride was on that YPVS 350 Gamma? You mentioned you might go that route with yours. Have you done anything with it yet? Nice pics as always silverstrom... Thanks 
1984 RZ350 - 421cc Athena Kit , V-Force III, 34mm Keihin's, K&N's, Billet Intake, Wicked Pipes
-
silverstrom
- Moderator
- Posts: 7038
- Joined: Wed Mar 24, 2010 2:20 am
Re: Just Pics
We have swapped bikes before, but not with that YamaGamma.
If my RG250 engine is bagged I'll likely stuff a 350 into it. Just easier for me to build. When that will happen is anyone's guess. Had a piston mishap with an 85 today and now that engine is in pieces on my bench. One step forward and 5 steps back.
If my RG250 engine is bagged I'll likely stuff a 350 into it. Just easier for me to build. When that will happen is anyone's guess. Had a piston mishap with an 85 today and now that engine is in pieces on my bench. One step forward and 5 steps back.
-
aaronmvrider
- -----
- Posts: 6607
- Joined: Tue Sep 02, 2008 7:44 am
- Location: Central Coast N.S.W Australia
Re: Just Pics
sing out if you need any parts.... hahahahahahah
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000
Re: Just Pics
Three very nice bikes right there.
One of the nicer yamagamma's I've seen, and I really want another early TZR again.
I've even found the bloke who bought mine and hopefully can get it back.
One of the nicer yamagamma's I've seen, and I really want another early TZR again.
I've even found the bloke who bought mine and hopefully can get it back.
76 TZ350(project).
82 RD350LC.
82 SR250.
83 RZ350YPVS.
88 RZ250 YPVS(project).
83 FJ1100.
96 YZF750R(track bike).
99 YZF1000 R1.
00 YZF1000 R1.
72 CB750four.
Lifan 125 Pitbike.
82 RD350LC.
82 SR250.
83 RZ350YPVS.
88 RZ250 YPVS(project).
83 FJ1100.
96 YZF750R(track bike).
99 YZF1000 R1.
00 YZF1000 R1.
72 CB750four.
Lifan 125 Pitbike.
Re: Just Pics
Does anyone know in a nutshell why you don't see 2MA's with the RGV conversion front and rear.
76 TZ350(project).
82 RD350LC.
82 SR250.
83 RZ350YPVS.
88 RZ250 YPVS(project).
83 FJ1100.
96 YZF750R(track bike).
99 YZF1000 R1.
00 YZF1000 R1.
72 CB750four.
Lifan 125 Pitbike.
82 RD350LC.
82 SR250.
83 RZ350YPVS.
88 RZ250 YPVS(project).
83 FJ1100.
96 YZF750R(track bike).
99 YZF1000 R1.
00 YZF1000 R1.
72 CB750four.
Lifan 125 Pitbike.
-
gammaguy21
- Posts: 232
- Joined: Mon Apr 23, 2007 4:06 pm
Re: Just Pics
Good day, fantastic ride, great company!
I need to get my goPro up and running.
The seat subframe may need to have the lower braces altered in order for the rgv banana arm to get full range of motion too.
Seems they also make good club/ vintage racers as well, so modifying may be against club rules.
Have only every seen this one with the rgv swap... too bad it was never finished - looked like it had lots of potential (http://www.rzrd500.com/phpBB3/viewtopic ... &hilit=tzr)
I need to get my goPro up and running.
I think that most suspension swaps are for the benefit of tire choice with 17 inch wheels. The TZR250 1kt/2ma comes stock with 17 inch wheels.Benno #03 wrote:Does anyone know in a nutshell why you don't see 2MA's with the RGV conversion front and rear.
The seat subframe may need to have the lower braces altered in order for the rgv banana arm to get full range of motion too.
Seems they also make good club/ vintage racers as well, so modifying may be against club rules.
Have only every seen this one with the rgv swap... too bad it was never finished - looked like it had lots of potential (http://www.rzrd500.com/phpBB3/viewtopic ... &hilit=tzr)