'84 RZR 250 (Jap import)
Moderator: rztom
Re: '84 RZR 250 (Jap import)
I like the paint, I actually taped up an almost identical paint scheme on my hybrid to see how it would look, only difference was the top stripe flared out to match the top of the 4DL tank I'm using and I had more taper on the speed block stripe.
Re: '84 RZR 250 (Jap import)
I reckon there should be an update to this thread today... waiting....
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: '84 RZR 250 (Jap import)
Lol Jon sorry im running behind,didnt even get to look at them today & man im hanging to bolt them on...
Re: '84 RZR 250 (Jap import)
meh... put a hold on life, progress needs to be made... haha!
Long weekend... watch out for the DDs.
Long weekend... watch out for the DDs.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: '84 RZR 250 (Jap import)
Whilst fking around with exhausts other day,this happened. Pulled a bloody helicoiled stud.
Was about to pull the barrel but stopped n had a think about it. Being helicoiled already the hole was pulled out to nearly 10mm. So tried a drill,then a tapped out to 12mm,which resulted in this little item.
A 12mm step down to 8mm stud.
Which allowed me to still go for a ride that afternoon lol.
Was about to pull the barrel but stopped n had a think about it. Being helicoiled already the hole was pulled out to nearly 10mm. So tried a drill,then a tapped out to 12mm,which resulted in this little item.
A 12mm step down to 8mm stud.
Which allowed me to still go for a ride that afternoon lol.
- two-stroke-brit
- -----
- Posts: 1701
- Joined: Fri Nov 22, 2013 10:49 pm
- Location: Houston texas
Re: '84 RZR 250 (Jap import)
Nice job
350LC,Athena 392 big bore,stock porting,swiss cheese air box,stock reeds,spec11 pipes.(now TSA big bore pipes)
She might not be pretty but she will always be a fun ride
1982 YAMA RD350LC
98KDX 220R
1967 TRIUMPH TIGER
2001 TRIUMPH TT600
She might not be pretty but she will always be a fun ride
1982 YAMA RD350LC
98KDX 220R
1967 TRIUMPH TIGER
2001 TRIUMPH TT600
Re: '84 RZR 250 (Jap import)
Nice! and loving the new lift! Whats that wheel clamp youve got on it?
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: '84 RZR 250 (Jap import)
Well done , nice job
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: '84 RZR 250 (Jap import)
Thanks Mark,its been along time since i cut threads like this lol.
Jon im just luving the new stand,thanks to your keen eyes lol,thanks again for spotting it for me.
The wheel clamp /holder is from supercrap,as per your design lol. Does away with that dodgy as wheel vice.
Jon im just luving the new stand,thanks to your keen eyes lol,thanks again for spotting it for me.
The wheel clamp /holder is from supercrap,as per your design lol. Does away with that dodgy as wheel vice.
Re: '84 RZR 250 (Jap import)
haha, no worries at all mate, glad its worked out so well, I bloody love mine as you know :)
I tend not to use the chock-clamp-thing most of the time, and yes the windy thing was junk.
I tend not to use the chock-clamp-thing most of the time, and yes the windy thing was junk.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: '84 RZR 250 (Jap import)
The original engine for the N1 getting rebuilt. New everything etc etc.....
Got a set of 1ua barrels bored,honed & ported by Roger. Billet head to top this off with billet pv's,news seals & bushes, billet intake ,vf4's & pwk's.
Again Roger supplied 4mm crank with all the fruit. New seals & bearings throughout. Clutch,shifter mod etc etc.
Topped off with a set of tsa pipes thanks to JonW.
Once engine is nearly ready ill pull bike in & strip it. Blast n paint the frame,swinger etc as everything else is rebuilt,so this will finish it off.
Got a set of 1ua barrels bored,honed & ported by Roger. Billet head to top this off with billet pv's,news seals & bushes, billet intake ,vf4's & pwk's.
Again Roger supplied 4mm crank with all the fruit. New seals & bearings throughout. Clutch,shifter mod etc etc.
Topped off with a set of tsa pipes thanks to JonW.
Once engine is nearly ready ill pull bike in & strip it. Blast n paint the frame,swinger etc as everything else is rebuilt,so this will finish it off.
Re: '84 RZR 250 (Jap import)
cool news on the original motor for the RZR being built :)
Ahh +7 hybrid LC... 443 Im guessing... exciting times... cant wait to see this new thread take shape!
Ahh +7 hybrid LC... 443 Im guessing... exciting times... cant wait to see this new thread take shape!
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: '84 RZR 250 (Jap import)
Blast and paint the frame... Are you doing this yourself? If not, I was Wondering if you had any recommendations around Sydney? Paint or powdercoat?
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Re: '84 RZR 250 (Jap import)
me too... Im slowly gathering a list of places not to use every time i have powedercoat done here :/
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com