Bike nite in Calgary.
Moderator: rztom
Bike nite in Calgary.
Myself, Offroad and Hooligan attended a bike nite yesterday at the local A&W, was very informative chatting with a wide range of bikers,here are a few pics.
Yes we were the last to leave.
Yes we were the last to leave.
90 RZ350 Track bike.
86 RZ350 Stock daily runner.
84 DT200
84 RZ500
86 RZ350 Stock daily runner.
84 DT200
84 RZ500
- steveloomis
- -----
- Posts: 1507
- Joined: Tue Dec 06, 2011 11:18 am
- Location: Oklahoma USA
Re: Bike nite in Calgary.
What!!!!!!!! No pics of the last to leave....????? Steve is camera shy..... If he is in a pic, point him out..... Most of us don't know what he looks like...
If he doesn't show his face soon, I may have to ride up there from Oklahoma and look him up!!!!!!!!!
If he doesn't show his face soon, I may have to ride up there from Oklahoma and look him up!!!!!!!!!
'81 RD350LC hybrid w/84 RZ engine. Zeel, Old style Toomeys, Yboot and filter 420 main 22.5 pilot, Air screw 2.5 turns out, DJ needle 2nd from top, Canadian VM26 carbs.
'85 KR/RZ US. Tank is seeping causing a blister in paint.....
'85 KR/RZ US. Tank is seeping causing a blister in paint.....
-
- Posts: 699
- Joined: Mon Dec 28, 2009 12:02 am
- Location: Hartford, CT
Re: Bike nite in Calgary.
That thing in black looks deadly.
1984 RZ350 YPVS 31K
1987 RD350 A/C
2009 Husqvarna SM610
1987 RD350 A/C
2009 Husqvarna SM610
-
- Moderator
- Posts: 7038
- Joined: Wed Mar 24, 2010 2:20 am
Re: Bike nite in Calgary.
I suspect it's unseen rider does toocrazydiablo wrote:That thing in black looks deadly.
Re: Bike nite in Calgary.
Who has that sweet pink fanny pack and where can I get one?!?
Re: Bike nite in Calgary.
It was cool to see four generations of Yamaha 2-strokes all together at the same time. All we needed was an F1 RZ.
'82 RD350LC in '81 colours, OEM pipes, UNI filters
'85 FZ750
'85 FZ750
Re: Bike nite in Calgary.
I saw all you guys that night. I live right around the corner. I would have stopped but was busy that evening.
I met Steve last Friday, as he's now working in the same shop I am.
I met Steve last Friday, as he's now working in the same shop I am.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bike nite in Calgary.
Uhhh doesn't Steve already have a full time job?
'82 RD350LC in '81 colours, OEM pipes, UNI filters
'85 FZ750
'85 FZ750
Re: Bike nite in Calgary.
I'll ask him about that tomorrow if he's in.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bike nite in Calgary.
Ya, Steve said today that things are slow in the field and he can afford the time. Sometimes seasonal work has its advantages.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bike nite in Calgary.
So then this would be a good time to get together with the two of you to reassemble my LC motor. :D
'82 RD350LC in '81 colours, OEM pipes, UNI filters
'85 FZ750
'85 FZ750
Re: Bike nite in Calgary.
What's up with the LC? I think I read about a million pieces in your basement. Is it ready to go together with new parts/seals/etc? ...or just a puzzle to put together/measure and check as it goes?
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Bike nite in Calgary.
AFAIK it is all ready to go back together. I believe that I have all the gaskets and everything. The cylinders and pistons are new and the crank is new. The only real problem is I have never put one back together again so I am kinda waffling about it. Can't do it wrong if I don't do it. :D
'82 RD350LC in '81 colours, OEM pipes, UNI filters
'85 FZ750
'85 FZ750
-
- Posts: 1373
- Joined: Tue Nov 12, 2013 2:34 am
Re: Bike nite in Calgary.
I will hopefully be joining you guys on the next Calgary RZ meet. Hooligan stopped by to pick up parts and it was really cool to see his 1990. Paint is almost done thanks to a ton of work from my father. Need a PV controller and put the bodywork on and mine will be ready to ride! :)