Toomey muffler internal retaining ring

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Post Reply
Message
Author
User avatar
motosapien
Posts: 396
Joined: Tue Aug 26, 2014 2:27 am
Location: Scottsdale, Arizona

Toomey muffler internal retaining ring

#1 Post by motosapien » Sat Jan 31, 2015 1:07 am

Gents, I am missing internal retaining rings on my toomey pipe mufflers...can anyone please help to source them.

Thanks
2>4

User avatar
pushstartrearset
-----
-----
Posts: 1339
Joined: Thu Mar 17, 2011 4:20 pm
Location: Vancouver, WA

Re: Toomey muffler internal retaining ring

#2 Post by pushstartrearset » Sat Jan 31, 2015 1:23 am

Is this what you are talking about? I can spare that and the o-ring if you need it.
Attachments
toomey_ring-clip.JPG
toomey_ring-clip.JPG (247.68 KiB) Viewed 1457 times
1984 RZ350L (U.S.) Old Toomeys, oil injected!, Y-boot K&N. loctite throttle cable holder on left carb!! , 410 mains, Dynojet needles 2.0 clip, #20 pilot @ 1.5 turn a.s., 240/512 p.v.

User avatar
motosapien
Posts: 396
Joined: Tue Aug 26, 2014 2:27 am
Location: Scottsdale, Arizona

Re: Toomey muffler internal retaining ring

#3 Post by motosapien » Sat Jan 31, 2015 2:09 am

pushstartrearset wrote:Is this what you are talking about? I can spare that and the o-ring if you need it.
Yes thats what I am looking for...the metal internal retaining ring.
2>4

vmxwinn
Posts: 469
Joined: Sat Jan 28, 2012 3:39 pm
Location: Danville CA

Re: Toomey muffler internal retaining ring

#4 Post by vmxwinn » Sat Jan 31, 2015 4:04 am

Its a common internal snap ring. You should be able to source one locally. Same with the O ring.
85 Y/B, Toomey pipes, PWK 28's, JJH Needle #2, 45 pilot jet, 145 main, Pods, VForce 4 reed blocks, +3 ignition, Milled head 1.1mm squish, R6 Shock, Progressive

Many Vintage MX Bikes, 03 ZRX1200R, 86 Moto Guzzi 1000 Le Mans MK IV, 86 VFR 750, 74 GT 550

User avatar
350Bfine
Posts: 136
Joined: Sun May 25, 2008 9:32 pm
Location: Virginia, USA

Re: Toomey muffler internal retaining ring

#5 Post by 350Bfine » Sat Jan 31, 2015 8:07 pm

You can still buy replacements direct from Toomey.
Tod

'75 RD350
'84 RZ350
'84 Kawasaki ZX900 Ninja

Post Reply