Normally I have used Millennium Technologies for my 2T cylinder services. I really would prefer someone to bore my cylinders that are familiar with the breed.
What company have you used in the past that you were happy with?
I did try searching for this topic, without much success.
Thanks in advance!
Go To Company for Boring Cylinders
Moderator: rztom
Go To Company for Boring Cylinders
2.5 RZ350's
2018 Grom
2017 KTM 390
2017 FZ-10
1973 RT3
1974 TY250
plus many others
2018 Grom
2017 KTM 390
2017 FZ-10
1973 RT3
1974 TY250
plus many others
- Evans Ward
- -----
- Posts: 1546
- Joined: Sun Jun 07, 2009 6:39 pm
- Location: Macon, GA
Re: Go To Company for Boring Cylinders
Team Scream Racing aka Chuck “Supertune” Quenzler in Clearwater FL. He is top notch!
84 RZ350-Toomeys,SCR milled head, stk 26 carbs,300 M, 35 P, stock regrooved needles AS 2.5 turns out,stk air box,Banshee reeds Zeel non-progr CDI,TSRL Program YPVS,alum rad,R6 shock,GV emulators w/RT springs,fork brace,Shindy steering damper.
- Evans Ward
- -----
- Posts: 1546
- Joined: Sun Jun 07, 2009 6:39 pm
- Location: Macon, GA
Re: Go To Company for Boring Cylinders
84 RZ350-Toomeys,SCR milled head, stk 26 carbs,300 M, 35 P, stock regrooved needles AS 2.5 turns out,stk air box,Banshee reeds Zeel non-progr CDI,TSRL Program YPVS,alum rad,R6 shock,GV emulators w/RT springs,fork brace,Shindy steering damper.
Re: Go To Company for Boring Cylinders
I really can't comment since I haven't built the motor, but another option you can consider is LA Sleeve that did mine. I think their prices are decent and they've done at least one RZ!
Re: Go To Company for Boring Cylinders
There a small outfit but I trust all my 2T work to Cranky Scott's in Antigo, WI. Give Wes or Scott a call 715-521-0000 Wes is long time owner and builder of RD and Banshees. Full machine shop.
Re: Go To Company for Boring Cylinders
+1 for Chuck. He did all of the work on my RD motor.