RZ/RD 350 & Misc. 2-Stroke Tech BBS

Smoker, FYI I have this swing arm drawn in Solid works. The production is laser cut and assembled tacked and welded. It can also be produced in Aluminium in the same process.

Thanks for posting that shot Zedixe. I get copie and paste but slide it in between is banana to me.
I missed the boat on computer skills.

Ill be at the 2 stroke extravaganza on the 29th and you'll find me at Rogers both (Wicked Motorsports Atv). He did an amazing job on the motor.

https://postimg.cc/gallery/2k65lqag6/" onclick="window.open(this.href);return false;

I used 4130 Chromolly and all is new steel. The only this i used off the old swingarm was the bearings and dust covers.

Here you go, I think this will work.
https://postimg.cc/gallery/1s53icbja/" onclick="window.open(this.href);return false;

Did that work?

No, I completely started from scratch and built one.
I need help loading the pictures. Why is this so hard?

Duane

Well I went and made my own swingarm. Got tired of looking for or having to settle on that same ole one that everyone uses. I wanted a wider tire in the back is why, I Started with a 2012 ex 650 wheel and caliper. One because there's so many available, if I decided to produce more swingarms there a ...

Thanks for the insight guys. I talked to a friend today an said I should look at the rear shock. I checked the set up from the previous owner and the rear shock was spun down way to much and the rebound was all the way tight. So I loosened the spring about 1/2 of an inch and adjusted the rebound to ...

Hi, I need help with set up. Currently have a RZ with 2007 R1 front end (2000) and a fz600 read end with a ohlen shock. The problem is in turns at higher speeds the bike feels like its twisting as if the front end is and read end aren't communicating together. I'm 195lbs 5-11. Could it be that the r...