NEW!!! WICKED MOTORSPORTS RZ 350-421CC PIPES! DYNO CHARTS!

General forum on engines, transmissions, gearing and modifications to each

Moderator: rztom

Message
Author
User avatar
wicked motorsports
-----
-----
Posts: 1386
Joined: Thu Apr 03, 2008 12:05 am
Location: Wicked Motorsports ATV Inc. USA
Contact:

NEW!!! WICKED MOTORSPORTS RZ 350-421CC PIPES! DYNO CHARTS!

#1 Post by wicked motorsports » Sun Mar 13, 2011 9:01 pm

I know I've been promissing saying we are building our own Rz pipes for the larger motors. Well we've finally....! Got around to finish these puppy's these are built to fit under the stock lower cowl. So for those that want to keep them on here they are fit ready. They were made for guy's looking for that extra edge in performance From stock ports to
Performance motors with port work, stroker cranks, or big bore 68mm after market cylinders. The more goodies you got the better they work. We will be posting the new dyno results within the weeks time. These come based off our banshee drag pipes so for those who seen the prior dyno passes with them they are fairly close to the same.

I hope you guy's like them. Like I said the old ticker isn't giving up till my hands and leg stop moving :smt023

Image
Last edited by wicked motorsports on Fri Apr 01, 2011 1:22 am, edited 2 times in total.
Wicked Motorsports Inc.
10552 Stanford Ave.
Garden Grove, CA 92840
The United States
http://www.wickedatv.com" onclick="window.open(this.href);return false;
1-714-530-2215 fax 1-714-530-2217
E-mail: roger@wickedatv.com

User avatar
JonW
Posts: 10600
Joined: Sat Oct 10, 2009 4:33 am
Location: Sydney
Contact:

#2 Post by JonW » Sun Mar 13, 2011 9:14 pm

Look nice Roger, assume these are mild steel? Any chance of stainless version and also whats the price?
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid

Like Watches? www.PloProf.com & www.DeskDivers.com

User avatar
wicked motorsports
-----
-----
Posts: 1386
Joined: Thu Apr 03, 2008 12:05 am
Location: Wicked Motorsports ATV Inc. USA
Contact:

#3 Post by wicked motorsports » Sun Mar 13, 2011 9:42 pm

Thanks Jon :smt003 You always got something nice to say also with questions lol....I don't mind them one bit either.

Price is $549.99
Comes as is in pic. with new flanges, springs, and o-rings along with original toomey silencers. We decided to use them sense it's easier to get them then make new ones. Plus they sound killer!

I'm not opposed to making them in stainless. I guess we could. they would be heavier sense they'll be made of stainless. Thou I know some are after them in stainless. Give me a bit and I'll try to make some.

For now we also offer them in a high temp black. Which is a. Additional $25 a pipe. That's what's on both my Rz's and been holding up and looking great!
Wicked Motorsports Inc.
10552 Stanford Ave.
Garden Grove, CA 92840
The United States
http://www.wickedatv.com" onclick="window.open(this.href);return false;
1-714-530-2215 fax 1-714-530-2217
E-mail: roger@wickedatv.com

User avatar
JonW
Posts: 10600
Joined: Sat Oct 10, 2009 4:33 am
Location: Sydney
Contact:

#4 Post by JonW » Sun Mar 13, 2011 10:00 pm

haha! Well you know me... I always like to see something new and then right away I want to know things about it and then start to wonder if it can be modded a bit, its a sickness i think! :smt003

Anyway, nice work mate. good price and i agree the black paint would work well, nice price on that too, most of us would pay that for cans and then mess it up ourselves LOL
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid

Like Watches? www.PloProf.com & www.DeskDivers.com

User avatar
nokturnal
-----
-----
Posts: 2293
Joined: Sun Jan 28, 2007 12:27 pm
Location: Ontario, Canada

#5 Post by nokturnal » Sun Mar 13, 2011 10:11 pm

Will those fit onto banshee/cheetah/athena barrels direct? Without the use of that flange of course.

graygoat657
Posts: 195
Joined: Mon Oct 18, 2010 12:12 am
Location: Franklin, TN

big bore pipes

#6 Post by graygoat657 » Sun Mar 13, 2011 10:14 pm

Awesome looking Pipes. You do great work sir.

User avatar
wicked motorsports
-----
-----
Posts: 1386
Joined: Thu Apr 03, 2008 12:05 am
Location: Wicked Motorsports ATV Inc. USA
Contact:

#7 Post by wicked motorsports » Sun Mar 13, 2011 10:35 pm

nokturnal wrote:Will those fit onto banshee/cheetah/athena barrels direct? Without the use of that flange of course.
You got it nokturnal. That's more the reason we made them. As well as our TMY Replicas. they both are design to fit banshee, Athena, or cubs. They are o-ring flange fitted. So they are slip on with o-rings. Guy's with non Rz cylinder bikes don't need to use the flanges.


Thanks for asking
Wicked Motorsports Inc.
10552 Stanford Ave.
Garden Grove, CA 92840
The United States
http://www.wickedatv.com" onclick="window.open(this.href);return false;
1-714-530-2215 fax 1-714-530-2217
E-mail: roger@wickedatv.com

User avatar
wicked motorsports
-----
-----
Posts: 1386
Joined: Thu Apr 03, 2008 12:05 am
Location: Wicked Motorsports ATV Inc. USA
Contact:

Re: big bore pipes

#8 Post by wicked motorsports » Sun Mar 13, 2011 10:38 pm

graygoat657 wrote:Awesome looking Pipes. You do great work sir.
Thanks so much for motivating words! :smt023
Wicked Motorsports Inc.
10552 Stanford Ave.
Garden Grove, CA 92840
The United States
http://www.wickedatv.com" onclick="window.open(this.href);return false;
1-714-530-2215 fax 1-714-530-2217
E-mail: roger@wickedatv.com

fredie27
Posts: 45
Joined: Sat May 23, 2009 11:56 pm

#9 Post by fredie27 » Sun Mar 13, 2011 11:50 pm

fantastic work :smt007

User avatar
aaronmvrider
-----
-----
Posts: 6607
Joined: Tue Sep 02, 2008 7:44 am
Location: Central Coast N.S.W Australia

#10 Post by aaronmvrider » Mon Mar 14, 2011 1:47 am

TOO CHEAP !!!!! nice pipes
1 x 4mm stroker rz 375cc 1983
1 x 7mm stroker rz 443cc 1984 (under construction)
1 x rz 500
1 x mv agusta 1000

User avatar
KennyBarroz
Posts: 356
Joined: Wed Oct 06, 2010 4:34 pm
Location: Sweden

#11 Post by KennyBarroz » Mon Mar 14, 2011 3:44 am

Now the question is..... When do we get to see the power from inside?? :smt007

They look real good and it's just great that they will fit with the belly pan on.
Real great! 1+
[smilie=thumb_yello.gif]
RD350 F2 -87: SETUP :
Stock 65mm barrels, TSS YPVS kit, 0,9squish, Vforce3 reeds, stock intake for Vforce3 reeds, 28mm PWK custom made for oilpump and vacuum line, jets 120/40, modified airbox, Zeeltronic PCDI-10V - Custom curve

User avatar
This old RZ
Posts: 1773
Joined: Sun Nov 27, 2005 12:04 am
Location: So.Cal

#12 Post by This old RZ » Mon Mar 14, 2011 2:48 pm

Roger,Are you going to dyno these vs. your standard pipes,curious as to where the power is moved around. Not that Im buying,Ive my new set in the box still. But when people ask we can refer your offerings with better knowledge

Keep up the good work:smt023 NICE PRODUCTS :smt028

Good luck with the neck and back,be careful of any steroid use, one of the owners of my company,broke his neck playing hockey and had it fused,all was as good as could be expected for years..he was active still played hockey,avid bicycle rider.then he had a dammed heart attack@45 yrs old.Doctors mentioned that it might have been the excessive steroid use :smt017 . All this happened three weeks after the company was sold and his share was estimated at somewhere around 3.5-5 million dollars...Not a good way to retire at a young age..but hes still here so :smt001 TAKE CARE OF YOURSELF :smt002 :smt023

User avatar
wicked motorsports
-----
-----
Posts: 1386
Joined: Thu Apr 03, 2008 12:05 am
Location: Wicked Motorsports ATV Inc. USA
Contact:

#13 Post by wicked motorsports » Fri Mar 18, 2011 5:28 am

fredie27 wrote:fantastic work :smt007
Gracias señor for the kind words :smt028
Wicked Motorsports Inc.
10552 Stanford Ave.
Garden Grove, CA 92840
The United States
http://www.wickedatv.com" onclick="window.open(this.href);return false;
1-714-530-2215 fax 1-714-530-2217
E-mail: roger@wickedatv.com

User avatar
wicked motorsports
-----
-----
Posts: 1386
Joined: Thu Apr 03, 2008 12:05 am
Location: Wicked Motorsports ATV Inc. USA
Contact:

#14 Post by wicked motorsports » Fri Mar 18, 2011 5:32 am

aaronmvrider wrote:TOO CHEAP !!!!! nice pipes
Lol... we can build them at a resonable price but not
Cheap lol...sense we
Have easy access to machinery and technology. What's starting to
Pinch us is the cost of materials thou.
Wicked Motorsports Inc.
10552 Stanford Ave.
Garden Grove, CA 92840
The United States
http://www.wickedatv.com" onclick="window.open(this.href);return false;
1-714-530-2215 fax 1-714-530-2217
E-mail: roger@wickedatv.com

User avatar
wicked motorsports
-----
-----
Posts: 1386
Joined: Thu Apr 03, 2008 12:05 am
Location: Wicked Motorsports ATV Inc. USA
Contact:

#15 Post by wicked motorsports » Fri Mar 18, 2011 5:36 am

KennyBarroz wrote:Now the question is..... When do we get to see the power from inside?? :smt007

They look real good and it's just great that they will fit with the belly pan on.
Real great! 1+
[smilie=thumb_yello.gif]
You got it kennyBarroz. Thanks! Keeps your eye's open got the test done already! I can't wait to post them. They did awesome!
Wicked Motorsports Inc.
10552 Stanford Ave.
Garden Grove, CA 92840
The United States
http://www.wickedatv.com" onclick="window.open(this.href);return false;
1-714-530-2215 fax 1-714-530-2217
E-mail: roger@wickedatv.com

Post Reply