Dyna Mini Tower wire question
Moderator: rztom
-
thumper580
- Posts: 60
- Joined: Wed Jul 12, 2017 3:34 pm
- Location: Virginia
Dyna Mini Tower wire question
Putting a set of the 0.5ohm Dyna Mini tower coils on my RG500. The Dyna coils have a red dot next to the "positive" spade connector. The stock wires are white and blue/white. Looking at the service manual I'm going with the white wire connecting to the red dot "positive" on the Dyna. Is this correct for those folks that have done this before. Thanks.