What temp for the thermal adhesive

General forum on fairings, seats, tanks, tail sections, painting and other bodywork modifications

Moderator: rztom

Post Reply
Message
Author
rammstein86
Posts: 49
Joined: Sun Jul 17, 2022 8:03 am

What temp for the thermal adhesive

#1 Post by rammstein86 » Tue Nov 29, 2022 3:05 pm

Hi

I need to put New thermal adhesive in the rear side fairing where pass the exhaust.

What temp i need to take ? 500 celsius degree is ok ?

Thanks

rz500guytexas
Posts: 335
Joined: Wed Jul 03, 2019 1:46 pm

Re: What temp for the thermal adhesive

#2 Post by rz500guytexas » Tue Nov 29, 2022 6:41 pm

I would think. How are you going to protect your nuts and your prostate?

rammstein86
Posts: 49
Joined: Sun Jul 17, 2022 8:03 am

Re: What temp for the thermal adhesive

#3 Post by rammstein86 » Wed Nov 30, 2022 3:55 am

Sorry i don't understand prostate and nuts

It's a joke ?

rd84
- - - - -
- - - - -
Posts: 1618
Joined: Thu Nov 17, 2005 7:12 am
Location: Leicestershire, UK

Re: What temp for the thermal adhesive

#4 Post by rd84 » Sun Dec 18, 2022 12:01 pm

rammstein86 wrote: Wed Nov 30, 2022 3:55 am Sorry i don't understand prostate and nuts

It's a joke ?
The seat can get very hot in warm weather

rz500guytexas
Posts: 335
Joined: Wed Jul 03, 2019 1:46 pm

Re: What temp for the thermal adhesive

#5 Post by rz500guytexas » Mon Dec 19, 2022 12:35 pm

Serious about the seat. I sometimes wonder if it was not an aggravation for my prostrate cancer. Was one of the main reasons for selling my original 500. It was not enjoyable to ride in Texas. Was fine in cold weather but the rest of my body does not like the cold. Add some heat reflective insulation to both side of the shield under the seat and possibly do it to the seat itself.

rammstein86
Posts: 49
Joined: Sun Jul 17, 2022 8:03 am

Re: What temp for the thermal adhesive

#6 Post by rammstein86 » Tue Dec 20, 2022 2:43 am

Yes i think the Seat is probably very hot

rz500guytexas
Posts: 335
Joined: Wed Jul 03, 2019 1:46 pm

Re: What temp for the thermal adhesive

#7 Post by rz500guytexas » Wed Dec 21, 2022 12:05 pm

So you have never ridden the RZ for any length of time? Or at all?

Post Reply