Selling off leftover parts. Update: All on Ebay now
Moderator: rztom
Selling off leftover parts. Update: All on Ebay now
Thank you to those that purchased parts. Everything left has been listed on Ebay now.
I'm selling off most of what is leftover from my Hurricane Katrina project bike. Some are parts I acquired many years before the project began and some are original parts from the bike that weren't reused. I'm going to list some parts here but I'm going to sell quite a bit on Ebay in a few weeks and at much cheaper prices than Mach IV motors .
Trading parts: Sometime during the rebuild process, I lost a couple of parts that I know I had but the RZ gremlins got them. I think they've visited a lot of owners before me. I need the metal covers for the oil tank and radiator caps and the white plastic piece with the foam seal that mounts to the back of the airbox to seal against the tank. I'm also interested in an RZV shift lever. Priority on parts will go to those who have these pieces to trade.
Shipping: These parts are located in the US. Unfortunately, it is unbelievably expensive to ship parts from the US across the ocean. Small boxes start around $90+ to the UK and over $100+ to Australia and New Zealand. Therefore, I'd like to ship these parts to the US and Canada only. Sorry. Please, no tire kickers. We all know what it costs to ship parts so I only want to calculate shipping for those who are wanting to buy. I don't up charge on shipping. You'll pay what it cost me.
If you followed my Hurricane Katrina bike in the project section, then you know I went with the dual headlight conversion. I got this fairing many years ago from the UK when I was planning the project. It is an RZ500 aftermarket fiberglass piece with Hella headlamps. There are no mounting points on the inside for the fairing bracket so you will have to do some work to make it mount up. I paid a stupid amount of money for it back then. $150 Now $100 plus shipping. SOLD
Brand new Yambits fiberglass lower panels and bellypan. Yambits won't ship these out of the UK but I was able to get a set to the US. $350 Now $275 plus shipping. SOLD
Used fiberglass lower panels and bellypan. These are very thin race panels. One of the lower panels needs a mounting hole repaired. $125 Now $75 plus shipping.
I have a couple of mph speedos with the correct indicator needle. $125 Now $90 each plus shipping. Two 10,500 rpm tachs. $40 Now $25 each plus shipping, ONE SOLD. One kph speedo that I reset the odometer to zero. $50 Now $30 plus shipping.
Aftermarket used windscreens. $40 Now $30 each plus shipping. Smoke SOLD, clear still available.
Front fender. No damage just needs paint. $40 Now $30 plus shipping
Other parts:
Chinese bodywork kit in the white/red/blue stripe scheme. Brand new and complete except for the bellypan. This one didn't come with a tank cover but does have the RZV graphics. I used the bellypan on my bike and it matched up well. $300 Now $250 plus shipping
Original headlight with bracket. Nice. $75 Now $50 plus shipping
Original meter/gauge bracket, straight. $50 Now $35 plus shipping.
Watch Ebay in the coming weeks for some other parts and these parts if they don't sell here first.
I'm selling off most of what is leftover from my Hurricane Katrina project bike. Some are parts I acquired many years before the project began and some are original parts from the bike that weren't reused. I'm going to list some parts here but I'm going to sell quite a bit on Ebay in a few weeks and at much cheaper prices than Mach IV motors .
Trading parts: Sometime during the rebuild process, I lost a couple of parts that I know I had but the RZ gremlins got them. I think they've visited a lot of owners before me. I need the metal covers for the oil tank and radiator caps and the white plastic piece with the foam seal that mounts to the back of the airbox to seal against the tank. I'm also interested in an RZV shift lever. Priority on parts will go to those who have these pieces to trade.
Shipping: These parts are located in the US. Unfortunately, it is unbelievably expensive to ship parts from the US across the ocean. Small boxes start around $90+ to the UK and over $100+ to Australia and New Zealand. Therefore, I'd like to ship these parts to the US and Canada only. Sorry. Please, no tire kickers. We all know what it costs to ship parts so I only want to calculate shipping for those who are wanting to buy. I don't up charge on shipping. You'll pay what it cost me.
If you followed my Hurricane Katrina bike in the project section, then you know I went with the dual headlight conversion. I got this fairing many years ago from the UK when I was planning the project. It is an RZ500 aftermarket fiberglass piece with Hella headlamps. There are no mounting points on the inside for the fairing bracket so you will have to do some work to make it mount up. I paid a stupid amount of money for it back then. $150 Now $100 plus shipping. SOLD
Brand new Yambits fiberglass lower panels and bellypan. Yambits won't ship these out of the UK but I was able to get a set to the US. $350 Now $275 plus shipping. SOLD
Used fiberglass lower panels and bellypan. These are very thin race panels. One of the lower panels needs a mounting hole repaired. $125 Now $75 plus shipping.
I have a couple of mph speedos with the correct indicator needle. $125 Now $90 each plus shipping. Two 10,500 rpm tachs. $40 Now $25 each plus shipping, ONE SOLD. One kph speedo that I reset the odometer to zero. $50 Now $30 plus shipping.
Aftermarket used windscreens. $40 Now $30 each plus shipping. Smoke SOLD, clear still available.
Front fender. No damage just needs paint. $40 Now $30 plus shipping
Other parts:
Chinese bodywork kit in the white/red/blue stripe scheme. Brand new and complete except for the bellypan. This one didn't come with a tank cover but does have the RZV graphics. I used the bellypan on my bike and it matched up well. $300 Now $250 plus shipping
Original headlight with bracket. Nice. $75 Now $50 plus shipping
Original meter/gauge bracket, straight. $50 Now $35 plus shipping.
Watch Ebay in the coming weeks for some other parts and these parts if they don't sell here first.
Last edited by 2manyprjx on Sun Nov 21, 2021 11:11 pm, edited 6 times in total.
RZ500
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
-
- Posts: 43
- Joined: Fri Oct 29, 2021 4:45 am
Re: Selling off leftover parts
Would love a twin headlight conversion but I'm in the UK
Re: Selling off leftover parts
I'll ship it back over to the UK but be prepared for it to be well over $100 US for shipping.
RZ500
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
-
- Posts: 43
- Joined: Fri Oct 29, 2021 4:45 am
-
- Posts: 32
- Joined: Mon Jun 15, 2020 11:44 am
- Location: Chicago, IL USA
Re: Selling off leftover parts
I am interested in the Yambits lower fiberglass panels as at least one of my siding fairings is pretty trashed. Are these higher quality as compared to the Chinese kits? I would imagine so.
1986 RZ500S (Number 3 of 150)
1993 BMW K1100RT
2003 BMW K1200GT
1993 BMW K1100RT
2003 BMW K1200GT
Re: Selling off leftover parts. Prices reduced
Paul, PM sent.
RZ500
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
Re: Selling off leftover parts. Prices reduced
I sent you a PM.
-
- - - - - -
- Posts: 617
- Joined: Thu May 24, 2018 5:22 pm
Re: Selling off leftover parts. Update: All on Ebay now
Received the two lamp fairing and smoke screen this morning, thanks Greg.
It may end up replacing a cumbersome one piece fairing on an old ducati instead of going on the RZ ....
It may end up replacing a cumbersome one piece fairing on an old ducati instead of going on the RZ ....
Re: Selling off leftover parts. Update: All on Ebay now
Hi
I am looking for a MPH speedo the 150MPH version if you have it? Also a Tachometer
Many Thanks
Ade
I am looking for a MPH speedo the 150MPH version if you have it? Also a Tachometer
Many Thanks
Ade
Re: Selling off leftover parts. Update: All on Ebay now
Hi
I am looking for a MPH speedo the 150MPH version if you have it? Also a Tachometer
Many Thanks
Ade
I am looking for a MPH speedo the 150MPH version if you have it? Also a Tachometer
Many Thanks
Ade
Re: Selling off leftover parts. Update: All on Ebay now
Did you send this to the correct person?
Re: Selling off leftover parts
FZ600V4 Stroker wrote: ↑Sat Nov 06, 2021 6:55 am Would love a twin headlight conversion but I'm in the UK
Re: Selling off leftover parts. Update: All on Ebay now
Sorry Ade, I don't have either. Pretty much everything I had just sold on Ebay.
RZ500
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine
RZ350
SRX600
NT650 Hawk
VFR400R NC30
NS400R
CBR400RR
CBR250RR
DUC 916
Derbi GPR50 w/CR125 engine