First post here, enjoyed reading through the archive information, but I could not find the answer I needed to the following question
My 1GE model came with a service manual, but its the earlier 47X version
Is there a later manual available, or is there little content difference to be concerned about ?
Service Manual
Moderator: rztom
Re: Service Manual
Not much of a difference. YAMAHA didn't release a separate manual, just some additional pages showing the difference.
(carb setup, ignition curve)
(carb setup, ignition curve)
Bye
Martin
Martin
Re: Service Manual
thanks Martin, is there a download of these additional pages ? - were they bulletins with an official part number ?
I couldn't see anything in the site downloads section
I couldn't see anything in the site downloads section
Re: Service Manual
There is a separate document called "Service Information" which is 44 pages with a coloured big wiring diagram. This document had a revision of 5 pages in 1985.
The service manual remained unchanged as nothing changed in servicing.
The service manual remained unchanged as nothing changed in servicing.
Re: Service Manual
The revised "Service Information" is at the end of the "Service Manual" in the download section ( the last 6 pages ).
Re: Service Manual
Does anyone have a list of all the required torque values please for a RD 500?
Also for my 350 I found a sit that gives you specification of all the bolts lengths sizes pitch etc, do we have one here?
Thanks in advance.
Also for my 350 I found a sit that gives you specification of all the bolts lengths sizes pitch etc, do we have one here?
Thanks in advance.