500 Two-Stroke Tech

Calcetin Ganadero:
Thats a very low number! But not a 52X bike.
Thats a 53G Australia model.

RuZty wrote:Nice! Anybody got a mint 350 one to send him as a template? The little Transport Canada one would be a bonus.

He's working on the RZ350 one so we should have it available soon

NJRZ500 wrote:

RuZty wrote:Nice! Anybody got a mint 350 one to send him as a template? The little Transport Canada one would be a bonus.

He's working on the RZ350 one so we should have it available soon

Perfect! Good source for this sort of stuff. I'm please I found him for the group.

Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com

NJRZ500 wrote:

RuZty wrote:Nice! Anybody got a mint 350 one to send him as a template? The little Transport Canada one would be a bonus.

He's working on the RZ350 one so we should have it available soon

Excellent!

Well the RZ350 one is complete. I have placed my order

http://www.replicals.com/product_info.p ... ts_id=1682" onclick="window.open(this.href);return false;

NJRZ500 wrote:Well the RZ350 one is complete. I have placed my order

http://www.replicals.com/product_info.p ... ts_id=1682" onclick="window.open(this.href);return false;

Way to go! That completes the two RZ Yamahas.

Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com

I also posted it over on the 350 section and asked Tom to make it a sticky as well.

http://www.rzrd500.com/phpBB3/viewtopic ... 105#p91105" onclick="window.open(this.href);return false;

thanks, this is exactly what I was looking for, before I start my resto

I just wanted to say that I received my decal and it was missing a number, I don't know if it was my fault or Replicals. I sent an email to them and they immediately sent me another with the correct info, no questions asked.

Great service, I would highly recommend this company. Kudos to them.

Did I see somewhere that someone had the Canada Transport sticker reproduced as well? Would like to get a couple of these for my bikes. L8R Mark

solo 2 wrote:That's great, I will probably grab one. Are they exactly as shown in the pics or are they closer to the original. The original had square corners and the font looks a little finer. Not trying to nitpick but some doing true restos may care. I wonder if he could do the customs decal as it is more than just font.

I know this is an old question, but I got my reproduction VIN done by Brian at BDesign in Kitchener Ontario Canada - his work is stellar, he had me take a lot of pictures of my original and asks lots of questions and created a perfect reproduction and he does the transport canada decals also to go with it.

http://www.bdesigns.ca/Reproductions.htm" onclick="window.open(this.href);return false;

Rob

rklages wrote:I know this is an old question, but I got my reproduction VIN done by Brian at BDesign in Kitchener Ontario Canada - his work is stellar, he had me take a lot of pictures of my original and asks lots of questions and created a perfect reproduction and he does the transport canada decals also to go with it.

http://www.bdesigns.ca/Reproductions.htm" onclick="window.open(this.href);return false;

Rob

Excellent! Thanks for the link.

rklages wrote:I know this is an old question, but I got my reproduction VIN done by Brian at BDesign in Kitchener Ontario Canada - his work is stellar, he had me take a lot of pictures of my original and asks lots of questions and created a perfect reproduction and he does the transport canada decals also to go with it.

http://www.bdesigns.ca/Reproductions.htm" onclick="window.open(this.href);return false;

Rob

Rob,

With all due respect that guy is charging 4 times the price I got! And with that all the legal mumbo-jumbo you have to go through just to get it. No thanks. Glad I found who I did.

Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com

Bill - I don't disagree, I used him about 2 years ago before you found this other place that is much easier and cheaper, I just responded as LawBrkrRcn was looking for the transport Canada decal which BDesign included and if you are looking for a 100% accurate reproduction of the VIN label, they were very detail oriented making sure the font was 100% match and if you look closely at the original VIN decal, some numbers are slightly lower than others as some are printed on the decal with the rest of the info and then as they add the unique part of the VIN it is off the line a little.

If I was doing it again - I would just get the cheaper one, but if someone is looking for perfection, it might be worth the few extra bucks to them.

ROb

rklages wrote:Bill - I don't disagree, I used him about 2 years ago before you found this other place that is much easier and cheaper, I just responded as LawBrkrRcn was looking for the transport Canada decal which BDesign included and if you are looking for a 100% accurate reproduction of the VIN label, they were very detail oriented making sure the font was 100% match and if you look closely at the original VIN decal, some numbers are slightly lower than others as some are printed on the decal with the rest of the info and then as they add the unique part of the VIN it is off the line a little.

If I was doing it again - I would just get the cheaper one, but if someone is looking for perfection, it might be worth the few extra bucks to them.

ROb

Rob,

I hear ya. I couldn't find the Canadian sticker on the site? Perhaps he no longer does that one?

Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com