New RZV replica main harness and connectors (group purchase)

General forum on troubleshooting electrical problems and modifications to electrical systems

Moderator: rztom

Message
Author
RZVTokyo
Posts: 149
Joined: Fri Jun 27, 2008 12:35 pm
Location: Tokyo, Japan

Re: New RZV replica main harness and connectors (group purch

#46 Post by RZVTokyo » Fri Aug 24, 2018 6:22 am

I'll let you know next time I go to the shop.

Paulrs
Posts: 67
Joined: Tue Sep 08, 2015 5:27 pm
Location: Royston, UK

Re: New RZV replica main harness and connectors (group purch

#47 Post by Paulrs » Wed Aug 29, 2018 3:33 am

I would like a set of connectors if you can persuade the shop owner.

If he won't give up a complete set, then just the YPVS and CDI connectors would help.

Thanks
Paul

User avatar
FlyingBoat
Posts: 82
Joined: Sat Nov 09, 2019 6:17 pm
Location: Florida USA
Contact:

Re: New RZV replica main harness and connectors (group purchase)

#48 Post by FlyingBoat » Sat Feb 08, 2020 10:09 am

I have an OEM RZV harness in excellent condition, but my build on an RZV frame only is with temperature gauge (not fuel level) and side stand switch so I’m looking for a new OEM or high quality replica Canadian RZ500 wiring harness. I don’t want to modify my RZV harness if at all possible would prefer just to save for a rainy day.

Thanks,
Robert
1985 RZ500S Sold
1985 52X/RZV Project

User avatar
phildu31
Posts: 430
Joined: Tue Jul 19, 2011 7:49 pm
Location: Toulouse France

Re: New RZV replica main harness and connectors (group purchase)

#49 Post by phildu31 » Sat Feb 08, 2020 12:52 pm

If I were you, I would use the RZV harness without any cutting. Fuel level wire is useless and you should addan additional wire for side stand switch.
Plus maybe some adaptation for hand side connectors and meter connector.

User avatar
FlyingBoat
Posts: 82
Joined: Sat Nov 09, 2019 6:17 pm
Location: Florida USA
Contact:

Re: New RZV replica main harness and connectors (group purchase)

#50 Post by FlyingBoat » Sun Feb 09, 2020 11:59 am

I’ve ordered an RZV service manual from Japan so I can compare the wiring schematic of both, maybe it’s just a matter of adding an extra plug or spade connector in a spot or two...
1985 RZ500S Sold
1985 52X/RZV Project

User avatar
tacky1
Posts: 1248
Joined: Mon Sep 14, 2015 12:30 pm
Location: Bay Area. CA.

Re: New RZV replica main harness and connectors (group purchase)

#51 Post by tacky1 » Sun Feb 09, 2020 2:45 pm

I have an RZV harness that has been modded for an RZ/RD, I bought it and the dick head who sold it it me didn't mention it had been modded for an RZ/RD, I had to buy another RZV harness for my bike.
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo

User avatar
FlyingBoat
Posts: 82
Joined: Sat Nov 09, 2019 6:17 pm
Location: Florida USA
Contact:

Re: New RZV replica main harness and connectors (group purchase)

#52 Post by FlyingBoat » Sun Feb 09, 2020 7:51 pm

Yeah I’ve had a few parts arrive not as expected, 2 pairs of clip ons and only one good right side, others are slight bent or the tab stretched a bit. Another was a counter balance shaft from Japan with big bearing dry and spun out (with air?) guessing for clean rules shipping. Anyway have another balance I’m using and still on the hunt for a good left bar, and sure would be nice a really clean or even NOS (or replica?) RZ loom.
1985 RZ500S Sold
1985 52X/RZV Project

RZVTokyo
Posts: 149
Joined: Fri Jun 27, 2008 12:35 pm
Location: Tokyo, Japan

Re: New RZV replica main harness and connectors (group purchase)

#53 Post by RZVTokyo » Tue Feb 11, 2020 8:37 pm

Hi Robert

The 52X (Canadian Model) versions are available. The shop makes it on an "order-made" basis.

silverstrom
- - - - -
- - - - -
Posts: 3236
Joined: Sat Feb 04, 2012 7:36 am

Re: New RZV replica main harness and connectors (group purchase)

#54 Post by silverstrom » Tue Feb 11, 2020 9:08 pm

FlyingBoat wrote: Sat Feb 08, 2020 10:09 am I have an OEM RZV harness in excellent condition, but my build on an RZV frame only is with temperature gauge (not fuel level) and side stand switch so I’m looking for a new OEM or high quality replica Canadian RZ500 wiring harness. I don’t want to modify my RZV harness if at all possible would prefer just to save for a rainy day.

Thanks,
Robert
Just use the one you have. Tape over the unused RZV plugs and don't worry about the side stand switch. It's overrated.

User avatar
FlyingBoat
Posts: 82
Joined: Sat Nov 09, 2019 6:17 pm
Location: Florida USA
Contact:

Re: New RZV replica main harness and connectors (group purchase)

#55 Post by FlyingBoat » Tue Feb 11, 2020 9:20 pm

RZVTokyo wrote: Tue Feb 11, 2020 8:37 pm Hi Robert

The 52X (Canadian Model) versions are available. The shop makes it on an "order-made" basis.
Well that I like! Another blessing comes from mother Nippon!

Please, you’ll send pm with the details then kind sir (or madam)...

Thank you sincerely,
Robert
1985 RZ500S Sold
1985 52X/RZV Project

User avatar
FlyingBoat
Posts: 82
Joined: Sat Nov 09, 2019 6:17 pm
Location: Florida USA
Contact:

Re: New RZV replica main harness and connectors (group purchase)

#56 Post by FlyingBoat » Tue Feb 11, 2020 9:37 pm

silverstrom wrote: Tue Feb 11, 2020 9:08 pm
FlyingBoat wrote: Sat Feb 08, 2020 10:09 am I have an OEM RZV harness in excellent condition, but my build on an RZV frame only is with temperature gauge (not fuel level) and side stand switch so I’m looking for a new OEM or high quality replica Canadian RZ500 wiring harness. I don’t want to modify my RZV harness if at all possible would prefer just to save for a rainy day.

Thanks,
Robert
Just use the one you have. Tape over the unused RZV plugs and don't worry about the side stand switch. It's overrated.
Thanks John, I appreciate your input,
I did have the side stand switch on my old bike though,
and have already purchased an RZ side stand w/ switch bracket and new Yamaha bagged switch so I’m probably leaning toward using them :grin:
New chrome spring too!
1985 RZ500S Sold
1985 52X/RZV Project

User avatar
FlyingBoat
Posts: 82
Joined: Sat Nov 09, 2019 6:17 pm
Location: Florida USA
Contact:

Re: New RZV replica main harness and connectors (group purchase)

#57 Post by FlyingBoat » Wed Feb 19, 2020 9:04 am

Is this the link to the Japanese site offering RZV 51X (type 00, 01 and 02 メインも含む全系統ヒューズを
「フロントカウル内」に集約した製品 all fuses consolidated at front), and RZ 52X (type 00 and 01 当社製ヒューズボックスユニット付 with fuse box kit) wiring harness?

http://business4.plala.or.jp/hi-side/Hi ... AMAHA.html

Robert
1985 RZ500S Sold
1985 52X/RZV Project

Geoff-Lansdell
Posts: 3
Joined: Fri Jun 11, 2021 6:30 am

Re: New RZV replica main harness and connectors (group purchase)

#58 Post by Geoff-Lansdell » Fri Jun 11, 2021 2:31 pm

Hi, newbee to this forum so please be gentle!! Is this loom still available?
Thanks in advance

Geoff-Lansdell
Posts: 3
Joined: Fri Jun 11, 2021 6:30 am

Re: New RZV replica main harness and connectors (group purchase)

#59 Post by Geoff-Lansdell » Fri Jun 11, 2021 2:31 pm

Hi, newbee to this forum so please be gentle!! Is this loom still available?
Thanks in advance

Geoff-Lansdell
Posts: 3
Joined: Fri Jun 11, 2021 6:30 am

Re: New RZV replica main harness and connectors (group purchase)

#60 Post by Geoff-Lansdell » Tue Jun 15, 2021 2:28 pm

Hi, I am very interested in a harness and a set of connectors if they are still available

Post Reply