Looks like I'll need some help with this.
I'd like a CAD drawing of the RZV kickstand bracket.
Doesn't have to be exact, but close enough for machining a working part.
I'd like to drill an 8mm hole and weld in a pin, just like OEM.
The part is about 10mm thick and the mounting hole centers are 96mm, just for reference.
I could do the measurements, but it's probably better to send the part to the person doing the CAD drawing. If anyone is interested, please post or PM me. I'm willing to pay cash or trade parts.
Thanks!
RZV Kickstand Bracket
Moderator: rztom
- Speed Freak
- - - - - -
- Posts: 930
- Joined: Sun Oct 28, 2012 6:38 pm
- Location: Voitsberg, Austria
Re: RZV Kickstand Bracket
What`s the difference between RZV (51X) and RD (47X) part?
My bikes:
RD500 YPVS 1GE
RD350 YPVS 31K 1985
Honda CBR 1000 RR SC57
Yamaha R1 RN04
RD500 YPVS 1GE
RD350 YPVS 31K 1985
Honda CBR 1000 RR SC57
Yamaha R1 RN04
Re: RZV Kickstand Bracket
I've got the steel frame on my complete RZ500.Speed Freak wrote:What`s the difference between RZV (51X) and RD (47X) part?
I'll compare the bracket on the steel frame to the RZV bracket I got from RZVTokyo.
Re: RZV Kickstand Bracket
That would be a simple item to measure the drawin a cad program, no need for scanning.
Re: RZV Kickstand Bracket
It will take some effort for me to get the RD bracket, but I'm on it.Speed Freak wrote:What`s the difference between RZV (51X) and RD (47X) part?
This is really a question for jackson.40.... :Bat Signal:
Last edited by Smoker on Wed Feb 14, 2018 9:54 pm, edited 1 time in total.
Re: RZV Kickstand Bracket
The mounting hole centers are about 10mm wider on the RD.
Re: RZV Kickstand Bracket
I've (barely) started on some hand drawings that hopefully could be translated into CAD.begbie wrote:That would be a simple item to measure the drawin a cad program, no need for scanning.
I'll post my progress. Not enough to show, yet.