Grommets needed
Moderator: rztom
-
- Posts: 13
- Joined: Fri Aug 25, 2023 11:08 pm
- Location: WI USA
Grommets needed
Hi folks. I've been searching since yesterday everywhere I can think of online for the grommets that hold the right and left side panels in place (the ones that mount in the frame and hold the little "spikes" on the panels tightly.
The original part number was 90480-01416 and it looks like at some point it was superseded by 90480-01415. The only place I found that supposedly has them is an online vendor called "MegaZip", and not only are they about $52 for 4 of them (shipped), but this place shows about a 4 to 7 week arrival time. I'd hate to wait that long for them to eventually tell me that they cannot in fact get them. I'm wondering if anyone here has come up with another part number from one of Yamaha's (or another manufacturer's) current models that would work. Thanks in advance for your help!
The original part number was 90480-01416 and it looks like at some point it was superseded by 90480-01415. The only place I found that supposedly has them is an online vendor called "MegaZip", and not only are they about $52 for 4 of them (shipped), but this place shows about a 4 to 7 week arrival time. I'd hate to wait that long for them to eventually tell me that they cannot in fact get them. I'm wondering if anyone here has come up with another part number from one of Yamaha's (or another manufacturer's) current models that would work. Thanks in advance for your help!
- Mike Cichetti
- - - - - -
- Posts: 390
- Joined: Sat Nov 19, 2005 5:58 pm
- Location: Pa
Re: Grommets needed
I may have some used ones, I’ll check and see. You need 4? Mike
- Mike Cichetti
- - - - - -
- Posts: 390
- Joined: Sat Nov 19, 2005 5:58 pm
- Location: Pa
Re: Grommets needed
Are they the somewhat oval shaped ones? Mike
-
- Posts: 13
- Joined: Fri Aug 25, 2023 11:08 pm
- Location: WI USA
Re: Grommets needed
Yep! They are very slightly oval shaped and I'm looking for 4 but will take what I can find. Thanks Mike!
Re: Grommets needed
Don't know how much these would end up costing?? But seem the correct ones ?
https://www.classicracing.nl/product/gr ... 0480-01415
https://www.classicracing.nl/product/gr ... 0480-01415
-
- - - - - -
- Posts: 3241
- Joined: Sat Feb 04, 2012 7:36 am
Re: Grommets needed
.
Last edited by silverstrom on Sat Oct 07, 2023 6:03 pm, edited 1 time in total.
-
- Posts: 13
- Joined: Fri Aug 25, 2023 11:08 pm
- Location: WI USA
Re: Grommets needed
Thanks for all of the input and suggestions guys! It looks like Mike has some used ones that he is sending me, but I appreciate the help locating the new ones as well!
-
- Posts: 13
- Joined: Fri Aug 25, 2023 11:08 pm
- Location: WI USA
Re: Grommets needed
THANK YOU Mike Cichetti! The grommets arrived today and they are perfect! I sent you a PM a few minutes ago.
- Mike Cichetti
- - - - - -
- Posts: 390
- Joined: Sat Nov 19, 2005 5:58 pm
- Location: Pa
Re: Grommets needed
Very glad they worked out for you. Enjoy l want to see a picture when you are all finished. Mike
-
- Posts: 13
- Joined: Fri Aug 25, 2023 11:08 pm
- Location: WI USA
Re: Grommets needed
Definitely Mike! The bike was pretty much perfect when I bought it, but it's a bit "disassembled" right now. As soon as I get it all buttoned up though, I'll send you a few pics.