Rear Crank Timing out 2.5 Degrees - Part 2
Moderator: rztom
Rear Crank Timing out 2.5 Degrees - Part 2
Good Day Fellow Club Member and Future Members:
I have been notified that I will have a prototype key sometime next week. I will then do a mock up engine and test for exacting timing. Following that, given no refinements are required, I'll be ordering a run of the keys made. Thanks for your patience.
I have been notified that I will have a prototype key sometime next week. I will then do a mock up engine and test for exacting timing. Following that, given no refinements are required, I'll be ordering a run of the keys made. Thanks for your patience.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Rear Crank Timing out 2.5 Degrees - Part 2
Great Bill, thanks for the update!
Re: Rear Crank Timing out 2.5 Degrees - Part 2
Thank you for the update.
RD500LC NS400R KR1 CBR600FL CBR600FS ZX636A1P ZXR750J HAYABUSA BUELL NC24 NC30 ZXR400L SP1 ROYAL ENFIELD 650 & 535 CONTIs TL1000R, 1987 landrover 90, 1977 LIGHTWEIGHT & 1973 88
Re: Rear Crank Timing out 2.5 Degrees - Part 2
Quick update. Our recent extreme cold weather put a stopper on the machinist's operation for several days as staff were very limited. Hoping to see something in a week or so now that things are getting back to some normalcy.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Rear Crank Timing out 2.5 Degrees - Part 2
Prototypes on the way! Will keep you all updated.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Rear Crank Timing out 2.5 Degrees - Part 2
Thanks Bill!
Re: Rear Crank Timing out 2.5 Degrees - Part 2
UPDATE!!!! I really kind of despise machinists that promise and never deliver! That's goes for pretty much anyone actually. So I have went through two machine shops local to me only to be passed off. I have now gone another route and have two prototypes in hand. We'll need a slight refinement and we'll be ready to start manufacturing.
Thank you all for your patience as this has been very frustrating for me as well. Hopefully not too much longer.
Thank you all for your patience as this has been very frustrating for me as well. Hopefully not too much longer.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Rear Crank Timing out 2.5 Degrees - Part 2
Sorry for the machinist troubles, thank you for your perseverance Bill!