stator or not

General forum on troubleshooting electrical problems and modifications to electrical systems

Moderator: rztom

Message
Author
500.FLETCH
- - - - -
- - - - -
Posts: 102
Joined: Thu Jul 24, 2008 9:52 am
Location: london

Re: stator or not

#16 Post by 500.FLETCH » Tue Apr 07, 2020 3:23 pm

I have swapped the coils
and it done the same thing
I will put a message on the forum to see if I can send cdi to someone to check for me
if I cant find one and it is that can I buy the spare one of you?
cheers
allways look on the bright side of life
LMAO

silverstrom
- - - - -
- - - - -
Posts: 3241
Joined: Sat Feb 04, 2012 7:36 am

Re: stator or not

#17 Post by silverstrom » Tue Apr 07, 2020 9:59 pm

500.FLETCH wrote: Tue Apr 07, 2020 3:23 pm
if I cant find one and it is that can I buy the spare one of you?
cheers
We can discuss it if needed. Hopefully you'll find a way to test yours so you can know for sure.

MK
Posts: 487
Joined: Thu Mar 09, 2006 12:54 pm
Location: Germany
Contact:

Re: stator or not

#18 Post by MK » Thu Apr 09, 2020 1:17 pm

What exactly did you swap?
Hopefully you mounted the upper coil to the lower cylinders and vice versa?

If yes and the issue persists, then swap the orange wires on the lower/upper coil primary side. You'll need to manufacture two extra cables to extend the stock ones.
Or simply insert two bullet connectors into the orange cables between CDI and CDI plug. In that case you can swap very easily.
If you swap cables and the effects changes location, too, then that's hard evidence for the CDI being faulty.
Bye
Martin

500.FLETCH
- - - - -
- - - - -
Posts: 102
Joined: Thu Jul 24, 2008 9:52 am
Location: london

Re: stator or not

#19 Post by 500.FLETCH » Tue Apr 14, 2020 2:20 pm

What exactly did you swap? coils leads and caps only?
Hopefully you mounted the upper coil to the lower cylinders and vice versa? wtf can this be done?
allways look on the bright side of life
LMAO

Post Reply