Page 15 of 15
Re:
Posted: Wed Nov 22, 2017 7:17 pm
by shergar
stevef wrote:If you cant find any mad beavers to buy make them yourself, just some aluminium sheet and harley sportster filters as you know.
I modified these to fit the 28 mm mikuni carbs with KR1S airbox rubbers.
I find there is a bit less induction noise with these filters over the foam pod filters.
hi paul did you use bill wilsons carb cable , fuel bracket , choke bracket set up mate , have you any pics of all your build cause of that photo bucket issue ? cheers paul
Re: kpke RZ500 resto/mod
Posted: Thu Nov 23, 2017 5:26 am
by rd84
Really nice looking mod - looks neat and tidy
Cheers
Paul
Re: kpke RZ500 resto/mod
Posted: Thu Nov 23, 2017 4:54 pm
by adr1an
RD350LC (80 to 82) intake carb rubbers will do the same job as the KR1S rubbers for TM28's and you can get them more readily.
Re: kpke RZ500 resto/mod
Posted: Thu Nov 23, 2017 9:57 pm
by BigGuy
adr1an wrote:RD350LC (80 to 82) intake carb rubbers will do the same job as the KR1S rubbers for TM28's and you can get them more readily.
Thank you, very good info!
Re: kpke RZ500 resto/mod
Posted: Wed Jul 17, 2019 12:49 am
by kpke
Just for fun bump
A lunch time ride with some friends 6/7/19
https://www.youtube.com/watch?v=hwk53eTcPDY&t=3s
And at The Quail 5/4/19
Re: kpke RZ500 resto/mod
Posted: Wed Jul 17, 2019 10:24 pm
by rz500guytexas
I want my wheels. looked fun
Re: kpke RZ500 resto/mod
Posted: Sat Aug 31, 2019 8:23 pm
by kpke
The R6 tail assembly was moving and shaking a bit due to "engineering" issues.
The lower part that holds tail light actually cracked in its weakest spot
I will probably purchase a CF replacement part and a few other CF parts just because.
Can anyone recommend a CF part vendor that sells parts that fit??? R6 parts... front fender, chain guard, maybe solo seat piece.
New upgrades include more brackets (to be PC black when I get another batch of parts off to the powder coater), standoffs, and SS fasteners.
It doesn't move any more