hi paul did you use bill wilsons carb cable , fuel bracket , choke bracket set up mate , have you any pics of all your build cause of that photo bucket issue ? cheers paulstevef wrote:If you cant find any mad beavers to buy make them yourself, just some aluminium sheet and harley sportster filters as you know.
I modified these to fit the 28 mm mikuni carbs with KR1S airbox rubbers.
I find there is a bit less induction noise with these filters over the foam pod filters.
kpke RZ500 resto/mod
Moderator: rztom
Re:
my bikes.
YL1 , AS3 (2) , YAS1 (2) , LC 350 ,
RD 400 , 400 DAYTONA , KH 250 s1 ,
CBX 1000 , RD 500 .
YL1 , AS3 (2) , YAS1 (2) , LC 350 ,
RD 400 , 400 DAYTONA , KH 250 s1 ,
CBX 1000 , RD 500 .
Re: kpke RZ500 resto/mod
Really nice looking mod - looks neat and tidy
Cheers
Paul
Cheers
Paul
Re: kpke RZ500 resto/mod
RD350LC (80 to 82) intake carb rubbers will do the same job as the KR1S rubbers for TM28's and you can get them more readily.
Re: kpke RZ500 resto/mod
Thank you, very good info!adr1an wrote:RD350LC (80 to 82) intake carb rubbers will do the same job as the KR1S rubbers for TM28's and you can get them more readily.
Shake "N" Bake!
Re: kpke RZ500 resto/mod
Just for fun bump
A lunch time ride with some friends 6/7/19
https://www.youtube.com/watch?v=hwk53eTcPDY&t=3s
And at The Quail 5/4/19
A lunch time ride with some friends 6/7/19
https://www.youtube.com/watch?v=hwk53eTcPDY&t=3s
And at The Quail 5/4/19
Ken's Garage YouTube Channel
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
-
- Posts: 335
- Joined: Wed Jul 03, 2019 1:46 pm
Re: kpke RZ500 resto/mod
I want my wheels. looked fun
Re: kpke RZ500 resto/mod
The R6 tail assembly was moving and shaking a bit due to "engineering" issues.
The lower part that holds tail light actually cracked in its weakest spot
I will probably purchase a CF replacement part and a few other CF parts just because.
Can anyone recommend a CF part vendor that sells parts that fit??? R6 parts... front fender, chain guard, maybe solo seat piece.
New upgrades include more brackets (to be PC black when I get another batch of parts off to the powder coater), standoffs, and SS fasteners.
It doesn't move any more
The lower part that holds tail light actually cracked in its weakest spot
I will probably purchase a CF replacement part and a few other CF parts just because.
Can anyone recommend a CF part vendor that sells parts that fit??? R6 parts... front fender, chain guard, maybe solo seat piece.
New upgrades include more brackets (to be PC black when I get another batch of parts off to the powder coater), standoffs, and SS fasteners.
It doesn't move any more
Ken's Garage YouTube Channel
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)