Newbie on 500 forum (YZR 500 replicas)
Moderator: rztom
Re: Newbie on 500 forum (YZR 500 replicas)
After v aramo meeeting, and seeing Wolfgang and Dubsey bikes, decided to try a R& swingarm swap on my 98 bike
here the object, and related hardware, I0m taking all dimensions and......
draw on CAD all changes needed, not a very difficult activity
here the object, and related hardware, I0m taking all dimensions and......
draw on CAD all changes needed, not a very difficult activity
Alex
Re: Newbie on 500 forum (YZR 500 replicas)
Wow Alex, how did you CAD up the swingarm? Measure it or lazer scan? Some feat mate. I do CAD all day long (architect) and wouldn't fancy my chances drawing that up.
Must say, think the R6 arm is the right way to go. How did the big bore motor run??
Must say, think the R6 arm is the right way to go. How did the big bore motor run??
Re: Newbie on 500 forum (YZR 500 replicas)
Measured and 2D drawing
Big Bore runs
i have to solve some fine tuning in ignition department,
and try to understand because dashboard doesen't work
I can't make any test until now, but hope to ride it soon
thanks
Big Bore runs
i have to solve some fine tuning in ignition department,
and try to understand because dashboard doesen't work
I can't make any test until now, but hope to ride it soon
thanks
Alex
Re: Newbie on 500 forum (YZR 500 replicas)
some updates
here two views of 98 rep. with r6 swinger installed and new front caliper
here two views of 98 rep. with r6 swinger installed and new front caliper
Alex
Re: Newbie on 500 forum (YZR 500 replicas)
And..........
last autumn i decided to start another project based on 500 V4 engine, 1991 YZR replica
after get some parts, between Christmas holiday, i've started to work on new frame
last autumn i decided to start another project based on 500 V4 engine, 1991 YZR replica
after get some parts, between Christmas holiday, i've started to work on new frame
Alex
Re: Newbie on 500 forum (YZR 500 replicas)
Ciao Alex,
Breathtaking, unbelievable, awesome!
With all your perfectionism, you should modify your silencers with correct bent tips instead of the straight ones...
Breathtaking, unbelievable, awesome!
With all your perfectionism, you should modify your silencers with correct bent tips instead of the straight ones...
Re: Newbie on 500 forum (YZR 500 replicas)
Hi Alex,
Looks fantastic - really wonderful workmanship.
Thanks for sharing your progress - really interesting to see how you do some of the work.
Cheers
Paul
Looks fantastic - really wonderful workmanship.
Thanks for sharing your progress - really interesting to see how you do some of the work.
Cheers
Paul
Re: Newbie on 500 forum (YZR 500 replicas)
Alex you are doing a Wonderful job. Is this a bit wider than the 3ma frame? Do you have spec's on your frame mods like you have for the swingarm?
1985 RZ500
1986 RG500
1986 RG500 C
1992 RGV500 WW ATR
1992 RGV500 LS
1985 NS500 Spencer p
1989 TZR500 Biaggi p
1984 RZV500 Rainey p
1994 NSR250sp R
1983 NS250 p
1987 RG250 WW p
1983 RG250 p
1988 YSR50 p
1986 RG500
1986 RG500 C
1992 RGV500 WW ATR
1992 RGV500 LS
1985 NS500 Spencer p
1989 TZR500 Biaggi p
1984 RZV500 Rainey p
1994 NSR250sp R
1983 NS250 p
1987 RG250 WW p
1983 RG250 p
1988 YSR50 p
Re: Newbie on 500 forum (YZR 500 replicas)
I ... je , mais ... ... ... je ... ... alors là ... .
I had not followed this thread before actually.
Looking forward to see what's next !
David.
I had not followed this thread before actually.
Looking forward to see what's next !
David.
Re: Newbie on 500 forum (YZR 500 replicas)
of course, frame and all bike layout was drawn by CAD before buildns86 wrote:Alex you are doing a Wonderful job. Is this a bit wider than the 3ma frame? Do you have spec's on your frame mods like you have for the swingarm?
3MA frame (4DL to be precise) id widened 40mm and shortened approx 35mm to fit longer swingarm
Alex
Re: Newbie on 500 forum (YZR 500 replicas)
https://www.facebook.com/alex.arletti/v ... nref=story" onclick="window.open(this.href);return false;
after a long period trying to solving wiring issues, finally last sunday i restarted
bikes, now setting and feeling on ignition parameters are good, and bikes seems to runn better.
next step will be setting carburettors and i wil be ready for first trackday
after a long period trying to solving wiring issues, finally last sunday i restarted
bikes, now setting and feeling on ignition parameters are good, and bikes seems to runn better.
next step will be setting carburettors and i wil be ready for first trackday
Alex
Re: Newbie on 500 forum (YZR 500 replicas)
Hi Alex,
absolutely stunning! I know what feeling it is to hear the engine running after all the hard work. What is this "singing" noise of your engine (sounds like a turbo) - is this coming from the clutch?
absolutely stunning! I know what feeling it is to hear the engine running after all the hard work. What is this "singing" noise of your engine (sounds like a turbo) - is this coming from the clutch?
Re: Newbie on 500 forum (YZR 500 replicas)
my impression is that noise comes from camera
if you hear bike live noise is quite normal.
of course I removed double gears on crankshaft
and dry clutch rattle a lot if you pull lever.
if you hear bike live noise is quite normal.
of course I removed double gears on crankshaft
and dry clutch rattle a lot if you pull lever.
Alex
Re: Newbie on 500 forum (YZR 500 replicas)
A pleasure to see your work Alex !
Cheers
Paul
Cheers
Paul
Re: Newbie on 500 forum (YZR 500 replicas)
I didn't think I would get to look at that because I don't Facebook. But it opened up
Congratulations.
That is some stunning work.
Congratulations.
That is some stunning work.
Ken's Garage YouTube Channel
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)