Got a customizing or restoration project? Post your progress pictures and updates here
Moderator: rztom
-
BASH
- Posts: 100
- Joined: Thu Jan 03, 2008 6:59 pm
- Location: The Netherlands
#121
Post
by BASH » Wed Aug 18, 2010 3:56 am
RZ Mike wrote:Will you still run the balance shaft with a 70 degree motor? Wouldn't you need a balance shaft with different phasing on the lobes?
Nice project.
Cheers
No balance axle for me. But I will get new and much better balanced crackshafts in the engine. Saves allot of weight...
-
BASH
- Posts: 100
- Joined: Thu Jan 03, 2008 6:59 pm
- Location: The Netherlands
#122
Post
by BASH » Mon Sep 06, 2010 10:20 am
Hi Alex,
Nice welding! I saw that you are using a TZR MA3 frame. Why didn't you go for a SZR, it's wider already?
Gr, Bas
Ax-Racing wrote:Hi Bash
The Engine you saw is not mine
it was modified by Ralf Kras for an italian guy
now i'm biulding frames for my and his engine.
i have an engine with rz350 barrels conversion
but it need a complete disassemble and verify internal organ
and i'm at half of work for a dry clutch
(i asked you some pics' of modified side cover
)
about my frame weight i'm about 11 kg with all patrs before welding
without seat support.
add a couple of kg for some brackets and engine mount.
-
Ax-Racing
- Posts: 277
- Joined: Sat Oct 24, 2009 5:11 am
- Location: Modena (ITALY)
#123
Post
by Ax-Racing » Mon Sep 06, 2010 4:50 pm
Hi Bash, welcome back from holiday
Szr frame are basically the same of 3MA
my conversion need a wider and short frame than stock 3MA
because of long swingarm, quicly i can mockup entire rolling chassis
could you explain me your dry clutch drum, with elastic cushion ?
thanks
Alex
-
BASH
- Posts: 100
- Joined: Thu Jan 03, 2008 6:59 pm
- Location: The Netherlands
#124
Post
by BASH » Tue Nov 30, 2010 4:48 am
It's time for colors:
Another one
-
BASH
- Posts: 100
- Joined: Thu Jan 03, 2008 6:59 pm
- Location: The Netherlands
#125
Post
by BASH » Tue Dec 14, 2010 6:33 pm
Ready for the paintjob:
Regards,
Bash
-
aaronmvrider
- Posts: 1401
- Joined: Fri Nov 21, 2008 7:43 pm
- Location: Central Coast New South Wales
#126
Post
by aaronmvrider » Tue Dec 14, 2010 6:35 pm
very nice design... what colors are you going in the blocks etc...
my rides
rz 500 1984
2 x rz 350 1984
mv agusta f4 1000 2004
-
Andrew
- - - - - -
- Posts: 1333
- Joined: Thu Nov 17, 2005 7:58 am
- Location: Leicestershire. UK
#127
Post
by Andrew » Thu Dec 16, 2010 5:09 pm
Andy (UK)
RZV500R
FRC
Faster Faster !!!
-
cbn70
- Posts: 127
- Joined: Sat Dec 10, 2005 1:25 pm
- Location: Edmoton,Alberta Canada
#128
Post
by cbn70 » Thu Dec 16, 2010 6:31 pm
looks awsome. Can`t wait to see the finished(painted) product
-
rd84
- - - - - -
- Posts: 1618
- Joined: Thu Nov 17, 2005 7:12 am
- Location: Leicestershire, UK
#129
Post
by rd84 » Fri Dec 17, 2010 6:46 am
Fantastic work !! - very impressive.
Cheers
Paul
-
BASH
- Posts: 100
- Joined: Thu Jan 03, 2008 6:59 pm
- Location: The Netherlands
#130
Post
by BASH » Wed Dec 22, 2010 8:16 pm
Thx. guys,
Here an example how it will be. I hope that the bike is finished by next week.
Cheers!
BASH
-
aaronmvrider
- Posts: 1401
- Joined: Fri Nov 21, 2008 7:43 pm
- Location: Central Coast New South Wales
#131
Post
by aaronmvrider » Wed Dec 22, 2010 9:42 pm
i bet you are pleased !!!!!!
excellent job on finishing it off
whats your plans for her.... road or display or track ???
my rides
rz 500 1984
2 x rz 350 1984
mv agusta f4 1000 2004
-
BASH
- Posts: 100
- Joined: Thu Jan 03, 2008 6:59 pm
- Location: The Netherlands
#132
Post
by BASH » Thu Dec 23, 2010 4:42 am
aaronmvrider wrote:i bet you are pleased !!!!!!
excellent job on finishing it off
whats your plans for her.... road or display or track ???
Thx. this will be a track bike. I can use it for the road, but that's not really comfortable or practical anyway.
Regards
Bas
-
Ax-Racing
- Posts: 277
- Joined: Sat Oct 24, 2009 5:11 am
- Location: Modena (ITALY)
#133
Post
by Ax-Racing » Thu Dec 23, 2010 4:26 pm
Great work Bash
a wonderful present under christmas tree
Alex
-
BASH
- Posts: 100
- Joined: Thu Jan 03, 2008 6:59 pm
- Location: The Netherlands
#135
Post
by BASH » Wed Dec 29, 2010 7:32 pm