Getting to the stage of wiring on the Yzr Replica. Been looking at Dash's to use. Looked at Digtal (Translogic/Aim etc) and also toying with Koso or Standard. Anyone got any thoughts or experiences with their modifications etc. (Hard/Easy to wire up, pics, vids) If anyone has any help to give I'd appreciate your time.
Cheers
Dave.
Aftermarket Dash's.
Moderator: rztom
Aftermarket Dash's.
I'd rather be scared to death than bored to death!
Re: Aftermarket Dash's.
I used the Koso RX1N on the RZ350 and it's working just fine.
Wiring is doable for normal people who are not brain dead and can read and understand a wiring diagram.
Only issue was that there's two cables with the same color on the dash and you'll have to try & error to find the right one.
Concerning the settings I used 2C2P (2 cylinder , 2 piston) and impulse to "Hi" - that works for the black/yellow rpm signal on the stock CDI as well as with a Ignitech (purple extra cable).
Here's the according thread:
http://forum.rd350lc.de/viewtopic.php?t ... light=koso" onclick="window.open(this.href);return false;
Wiring is doable for normal people who are not brain dead and can read and understand a wiring diagram.
Only issue was that there's two cables with the same color on the dash and you'll have to try & error to find the right one.
Concerning the settings I used 2C2P (2 cylinder , 2 piston) and impulse to "Hi" - that works for the black/yellow rpm signal on the stock CDI as well as with a Ignitech (purple extra cable).
Here's the according thread:
http://forum.rd350lc.de/viewtopic.php?t ... light=koso" onclick="window.open(this.href);return false;
Bye
Martin
Martin
Re: Aftermarket Dash's. (Translogic/Aim/Koso)
Thanks Martin.
Thanks for the info.
Anyone got any help with Translogic or Aim dashes????
Thanks for the info.
Anyone got any help with Translogic or Aim dashes????
I'd rather be scared to death than bored to death!
Re: Aftermarket Dash's.
Ken's Garage YouTube Channel
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
Re: Aftermarket Dash's.
Thanks KPKE. Was this a good fit for the 500 loom? If you have anymore pics of the Koso from sat back I'd appreciate it. Was wanting to keep my Yzr with a "Traditional" gauge rather than a full on digital dash as I think it should be a round gauge with a needle. Looks good tho. Thanks. ??????
I'd rather be scared to death than bored to death!
Re: Aftermarket Dash's.
Hi Dave
If you prefer a tradional gauge check out speedhut gauges they can supply speedos, tachs, and temp gauges. The speedometers are GPS
Cheers Andy
If you prefer a tradional gauge check out speedhut gauges they can supply speedos, tachs, and temp gauges. The speedometers are GPS
Cheers Andy
There are holes in the sky where the rain gets in, but the holes are small, thats why the rain is thin
My rides
RZ500
Kawasaki 1969H1
Kawasaki 1970H1
Kawasaki 1972H1
Kawasaki 1973H2
Kawasaki 1972H2
Kawasaki Z1300
My rides
RZ500
Kawasaki 1969H1
Kawasaki 1970H1
Kawasaki 1972H1
Kawasaki 1973H2
Kawasaki 1972H2
Kawasaki Z1300