DYNO RUN of my modified RD (Abe replica)

Got a customizing or restoration project? Post your progress pictures and updates here

Moderator: rztom

Post Reply
Message
Author
3XV
Posts: 72
Joined: Sun Mar 05, 2017 6:09 am

DYNO RUN of my modified RD (Abe replica)

#1 Post by 3XV » Wed May 31, 2017 5:11 pm

Hey guys,
problems and feelings already described in „ Member´s-rids - new in”.
after warm-up the bulb at the rear right cylinder was blown. Not a good start. :smt013
After changing the bulb the run could start.
My feeling was right, power was not so much. 82,99 hp at the rear wheel at 10 360rpm and 58,54 torque.
Rough calculated is the power at the clutch 87 to 90hp.

That means next tuning steps will follow after some money is left. :smt002
Programmable CU and bigger carbs.
Attachments
IMG_7463.JPG
IMG_7463.JPG (137.6 KiB) Viewed 1336 times
IMG_7540 1.JPG
IMG_7540 1.JPG (129.06 KiB) Viewed 1336 times
IMG_7560.JPG
IMG_7560.JPG (114.03 KiB) Viewed 1336 times

podman
Posts: 504
Joined: Mon Nov 16, 2015 1:41 pm

Re: DYNO RUN of my modified RD (Abe replica)

#2 Post by podman » Thu Jun 01, 2017 6:54 am

Beautiful bike mate...what was you hoping for power wise then?

3XV
Posts: 72
Joined: Sun Mar 05, 2017 6:09 am

Re: DYNO RUN of my modified RD (Abe replica)

#3 Post by 3XV » Thu Jun 01, 2017 5:30 pm

The cylinder intake and outlet is modified. Also the other exhaust, carbon membrane, modified airbox and YPVS modifed.
Main jets changed to 215 caused of the bigger air flow of the airbox.
I was hoping for 88hp at the rear wheel.
The target is minimum 90hp at the rear wheel after the next modification with the carps and zeeltronic.
Panning is also to change to vforce of the YZ85

Hope it will become true.

Post Reply