Hi all new to the forum, I'm in the middle of modifying my 500 and need some advice from someone who has done the same.
I've had the motor done to stage 3 by Stan Stephens and had an r6 front and rear modified to fit with no modifications to the frame so that can put the standard parts back on in the future.
My question is the ignition switch? The rd ignition won't fit the modified r6 top yoke and the r6 ignition has different number of wires than the rd one.
Can anybody help
Thanks
Modified 500
Moderator: rztom
Re: Modified 500
I run an R6 front in mine, I used the RDRZ500 ignition, I did have to mod the lock part on the frame slightly to get it to work, It was only a little grinding, the stock forks and ignition still work perfectly as I checked, I didn't want to mod my frame where I couldn't run the stock suspension.
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo
Re: Modified 500
Here you can see a stock type RZ ignition switch mounted to the R6 upper triple.
I may have used longer standoffs in the end to recess the switch down lower.
Like tacky1 I had to do some grinding on the switch where the steering lock pin comes out.
I may have used longer standoffs in the end to recess the switch down lower.
Like tacky1 I had to do some grinding on the switch where the steering lock pin comes out.
Ken's Garage YouTube Channel
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
https://www.youtube.com/c/KensGarage1
1985 RZ500 (R6 suspension & body work)
Re: Modified 500
if you like a mod from an earlier bike. I did my front end from a YZF750. I bought a lock set from a 88 or 89 FZR1000. I also picked up a junk tank from the FZR1000. I had the aircraft flush mount gas cap for the RZ gas tank. The neat thing about the 88- 89 FZR1000 key set. You can remove the pig tail from the ignition of the FZR100 and use the RZ pig tail. The helmet and seat lock are the same.
1991 3MATZR250SP
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S
!993 3XVTZR250SP
1996 RGV250(Lucky Strike)
1994 MC28SP
1995 MC28SP
1996 MC28SP
1985 RG500(Walter Wolfe)
1984 IT490
1985 RZV500R
1985 NS400R
1985 NS400R
1997 VFR750
1992 FZR1000
RGV400
TZR500
TZR350
1990 RZ350
1971 Porsche911S
Re: Modified 500
Thanks for the replies I'll have a look thanks