ypvs servo location

Got a customizing or restoration project? Post your progress pictures and updates here

Moderator: rztom

Message
Author
trix
- - - - -
- - - - -
Posts: 371
Joined: Mon Feb 25, 2008 11:44 am
Location: Northern Ireland

Re: ypvs servo location

#16 Post by trix » Sun Nov 27, 2016 7:15 pm

Thanks guys
kpke; did your cables not melt at the position shown in your pics above? They look to be a similar distance from the pipes as mine would be? If you look at my 3rd image, you can see the cables will be between the pipes. Even in the standard position, dont the cables run towards the engine, passing between the two pipes?

I'll move mine down by half an inch or so to be on the safe side, but the cables will have to go back up between the pipes anyway to get over the top of the engine.

User avatar
kpke
Posts: 667
Joined: Tue Nov 30, 2010 9:54 pm
Location: Livermore, CA USA

Re: ypvs servo location

#17 Post by kpke » Mon Nov 28, 2016 11:37 am

After nearly 2000 miles there has been no degradation of the cable jackets.
Ken's Garage YouTube Channel :smt023
https://www.youtube.com/c/KensGarage1

1985 RZ500 (R6 suspension & body work)

trix
- - - - -
- - - - -
Posts: 371
Joined: Mon Feb 25, 2008 11:44 am
Location: Northern Ireland

Re: ypvs servo location

#18 Post by trix » Fri Dec 09, 2016 7:39 pm

i moved it down and back a little bit;

Image


Image

as you can see cables still have to go between the exhausts, fairly close to the "manifold" too

Image

Image

User avatar
tacky1
Posts: 1248
Joined: Mon Sep 14, 2015 12:30 pm
Location: Bay Area. CA.

Re: ypvs servo location

#19 Post by tacky1 » Fri Dec 09, 2016 8:27 pm

That looks a lot better there now. Looks like where mine is, Mine does barely touch the swingarm if the suspension gets fully pressed down.

What pipes are you using, They look really nice, Throw a pic up of them..
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1989 VFR750R RC30
1984 GPZ750 Turbo

trix
- - - - -
- - - - -
Posts: 371
Joined: Mon Feb 25, 2008 11:44 am
Location: Northern Ireland

Re: ypvs servo location

#20 Post by trix » Thu Feb 02, 2017 8:29 am

..sorry Tacky, hadn't noticed your post! They are jolly motos. Will put some pics on.

Post Reply