wolfgangh wrote:Thanks Smoker, here it is:
Picture shows the last 3 dyno runs - the green one with less peak power was with PV fully open earlier,
Track bike progress
Moderator: rztom
Re: Track bike progress
Re: Track bike progress
680*C seems quite low, I understand the 250 folks run in the 900 to 1100 range. Is there any more power if you lean it out to 800*? What is the optimum EGT for the RZ500?wolfgangh wrote:I will aim to stay below 680 deg C at WOT - today we had max. 580 on the dyno runs
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
-
- Posts: 126
- Joined: Fri Feb 26, 2016 12:55 pm
- Location: Issaquah WA
Re: Track bike progress
what is the melting temp of aluminum?RC45 wrote:680*C seems quite low, I understand the 250 folks run in the 900 to 1100 range. Is there any more power if you lean it out to 800*? What is the optimum EGT for the RZ500?wolfgangh wrote:I will aim to stay below 680 deg C at WOT - today we had max. 580 on the dyno runs
Re: Track bike progress
Beats me.. I just know I see EGT gauges with temp scales ranging from 350* to 1700* - must be *F thenmotosapien wrote:what is the melting temp of aluminum?RC45 wrote:680*C seems quite low, I understand the 250 folks run in the 900 to 1100 range. Is there any more power if you lean it out to 800*? What is the optimum EGT for the RZ500?wolfgangh wrote:I will aim to stay below 680 deg C at WOT - today we had max. 580 on the dyno runs
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
Re: Track bike progress
933.47 K motosapien wrote: what is the melting temp of aluminum?
660.32 °C
1220.58 °F
Re: Track bike progress
I guess that answers the question about *F vs *C LOLSmoker wrote:933.47 K motosapien wrote: what is the melting temp of aluminum?
660.32 °C
1220.58 °F
CBR1000RR SP2 HRC WSBK
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
TZ500V/OW53 Track bike
YZR500 OW81 Clone
OW69 Daytona 200 Replica - 784cc Monster
NS400 Track Bike
RS250R NF5
TZ250T 2KM
TZ250B 3YL
TZR250 3MA Track Bike
427ci C5 Z07
Re: Track bike progress
Hi Wolfgangh did you make any spare
Marlboro sticker kits or know of any
good supplier , thanks .also did you use
any fastners at the front of the seat unit ??
Your bike looks amazing ??Andy
Marlboro sticker kits or know of any
good supplier , thanks .also did you use
any fastners at the front of the seat unit ??
Your bike looks amazing ??Andy