Hi all,
My RD is now in bits awaiting a long overdue tidy up. I'd like to have the carb linkages and YPVS linkages replated.
What is the correct colour, is this zinc plating and is there anyone in the UK that you would recommend?
Finally, at the top of the rear mudguard, there are two small, triangular type heat shields on either side which are make from heat resistant material. Are these still available or can you get replacements?
Thanks.
Re-plating of Linkages etc - UK Company
Moderator: rztom
1601pete and Jackson.40 have info on the heat shields and plating in there threads that may help.
molly
http://www.rzrd500.com/500phpBB3/viewtopic.php?t=8445
http://www.rzrd500.com/500phpBB3/viewtopic.php?t=6290
molly
http://www.rzrd500.com/500phpBB3/viewtopic.php?t=8445
http://www.rzrd500.com/500phpBB3/viewtopic.php?t=6290
"sticks and stones may break my bones, but words I just delete them"
350LC 1983 really long gone
350LC YPVS 1984 gone
1986 RD500LC project nothing to see here!
350LC 1983 really long gone
350LC YPVS 1984 gone
1986 RD500LC project nothing to see here!
- jackson.40
- *****
- Posts: 2328
- Joined: Fri Dec 30, 2005 7:01 pm
- Location: Cambridge,UK
Hello,
Have a look at this link,it should clear things up.
http://www.rzrd500.com/500phpBB3/viewto ... t&start=15
As for the carbs,have a look at the second link Danny put up and you will see a set of nos carbs on my bike.Let me know if you need any more details.
Cheers Steve
Have a look at this link,it should clear things up.
http://www.rzrd500.com/500phpBB3/viewto ... t&start=15
As for the carbs,have a look at the second link Danny put up and you will see a set of nos carbs on my bike.Let me know if you need any more details.
Cheers Steve