Anyone had any experience with a check valve for fuel tank breathers?
The valve I have fitted to my fuel tank breather allows small amounts of fuel to still bypass it so looking for a good quality small valve 5-6mm fitting to a plastic pipe inlet and outlet that doesn't allow any fuel seepage.
I have done a little hunting on the inlet but was hoping someone has had good results from ones they have used?
Vent Valve
Moderator: rztom
Re: Vent Valve
Hi VinVin wrote:Anyone had any experience with a check valve for fuel tank breathers?
The valve I have fitted to my fuel tank breather allows small amounts of fuel to still bypass it so looking for a good quality small valve 5-6mm fitting to a plastic pipe inlet and outlet that doesn't allow any fuel seepage.
I have done a little hunting on the inlet but was hoping someone has had good results from ones they have used?
I fitted a very small inline YAMAHA TZ breather to my Spondon 500 and works a treat
I got it from Denis Trollop, wasnt cheap though, about £25 but I needed it.
Best regards
Johnny C.
http://www.vskcorrinaldi.co.uk/" onclick="window.open(this.href);return false;
Re: Vent Valve
Hi Johnny, hope you are well mate?
Thanks for the tip I will look into it.
Thanks for the tip I will look into it.