New RZV replica main harness and connectors (group purchase)

General forum on troubleshooting electrical problems and modifications to electrical systems

Moderator: rztom

Message
Author
RZVTokyo
Posts: 149
Joined: Fri Jun 27, 2008 12:35 pm
Location: Tokyo, Japan

Re: New RZV replica main harness and connectors (group purch

#16 Post by RZVTokyo » Mon Mar 14, 2016 6:46 am

Hi Steen,

I did receive the photos. I'll check with the shop when I go there on the 25th. I'll keep you posted.

Shayne

Twinsport
- - - - -
- - - - -
Posts: 221
Joined: Thu Nov 17, 2005 5:01 am
Location: Koege, Denmark
Contact:

Re: New RZV replica main harness and connectors (group purch

#17 Post by Twinsport » Fri Apr 01, 2016 5:14 pm

Shayne,
RZVTokyo wrote:... I'll keep you posted.
Not only did you do that - you got all the connectors I needed for the RD500 and for my kids Yamaha mopeds.

It's excellent! Just excellent!

For those of you curious to see the RD plugs, please have a look:

Image

Thanks a bunch!

/Steen
If I had a signature, it would be good.

rubberfingers
- - - - -
- - - - -
Posts: 576
Joined: Sun Nov 22, 2009 8:21 am
Location: Midlands UK

Re: New RZV replica main harness and connectors (group purch

#18 Post by rubberfingers » Tue May 24, 2016 7:05 pm

Hi is it possible to get the ypvs controller connector on its own?

Thanks

Andy
RD500
TZR250 2MA
TZR250 3MA
TDR250
YZF600R
DT125RE
XS750E
DTR125
FZ1

RZVTokyo
Posts: 149
Joined: Fri Jun 27, 2008 12:35 pm
Location: Tokyo, Japan

Re: New RZV replica main harness and connectors (group purch

#19 Post by RZVTokyo » Fri May 27, 2016 3:33 am

Hi Andy,

Are you looking for the YPVS controller side of the connector only or do you want the harness side as well?

Shayne

rubberfingers
- - - - -
- - - - -
Posts: 576
Joined: Sun Nov 22, 2009 8:21 am
Location: Midlands UK

Re: New RZV replica main harness and connectors (group purch

#20 Post by rubberfingers » Fri May 27, 2016 3:36 am

Hi

I just need the ypvs controller plug side. Been after one for years a used one would do.

Thanks

Andy
RD500
TZR250 2MA
TZR250 3MA
TDR250
YZF600R
DT125RE
XS750E
DTR125
FZ1

RZVTokyo
Posts: 149
Joined: Fri Jun 27, 2008 12:35 pm
Location: Tokyo, Japan

Re: New RZV replica main harness and connectors (group purch

#21 Post by RZVTokyo » Fri May 27, 2016 3:41 am

The shop has new ones available. I should be able to get you 1ea of the YPVS connector. Do you also need the pins?

Shayne

rubberfingers
- - - - -
- - - - -
Posts: 576
Joined: Sun Nov 22, 2009 8:21 am
Location: Midlands UK

Re: New RZV replica main harness and connectors (group purch

#22 Post by rubberfingers » Fri May 27, 2016 7:05 am

Yes please I need the pins to make a complete connector to attach to the loom
RD500
TZR250 2MA
TZR250 3MA
TDR250
YZF600R
DT125RE
XS750E
DTR125
FZ1

Eazy_ways
Posts: 24
Joined: Mon Aug 22, 2016 9:07 am
Location: Perth Australia

Re: New RZV replica main harness and connectors (group purch

#23 Post by Eazy_ways » Sun Nov 27, 2016 12:53 am

Hi, are these still available? Or does anybody have a contact for the connector kits?
Cheers

RZVTokyo
Posts: 149
Joined: Fri Jun 27, 2008 12:35 pm
Location: Tokyo, Japan

Re: New RZV replica main harness and connectors (group purch

#24 Post by RZVTokyo » Sun Nov 27, 2016 9:55 pm

The connector kits are usually sold with the harnesses. I'll ask the shop if they'll sell another connector kit alone. I was able to purchase a few extra connector sets the last time I made an order for two harnesses.

Eazy_ways
Posts: 24
Joined: Mon Aug 22, 2016 9:07 am
Location: Perth Australia

Re: New RZV replica main harness and connectors (group purch

#25 Post by Eazy_ways » Mon Nov 28, 2016 4:45 am

RZVTokyo wrote:The connector kits are usually sold with the harnesses. I'll ask the shop if they'll sell another connector kit alone. I was able to purchase a few extra connector sets the last time I made an order for two harnesses.
Thanks
Could you find out the cost of the harness too?
Thanks again.

torp68
- - - - -
- - - - -
Posts: 34
Joined: Thu May 19, 2016 10:55 am

Re: New RZV replica main harness and connectors (group purch

#26 Post by torp68 » Mon Mar 27, 2017 12:02 pm

Hi

I see above there are folks reporting interest in an RD500 harness. Has this been replicated?

Would be VERY interested in a new harness for my newly restored RD.
Feels awful to put that oily, butchered mess back onto the repainted frame..... :???:

Oyvind

Paulrs
Posts: 67
Joined: Tue Sep 08, 2015 5:27 pm
Location: Royston, UK

Re: New RZV replica main harness and connectors (group purch

#27 Post by Paulrs » Mon Mar 27, 2017 5:57 pm

Also interested in an RD500 loom if available.

Paul

Racer
Posts: 57
Joined: Fri Oct 29, 2010 5:43 pm

Re: New RZV replica main harness and connectors (group purch

#28 Post by Racer » Mon Oct 02, 2017 4:50 am

RZVTokyo wrote:The shop has new ones available. I should be able to get you 1ea of the YPVS connector. Do you also need the pins?

Shayne

Hello Shayne

I need the YPVS connector With pins. It is at the YPVS Controller side, not the loom side.
Can you supply this?

Racer
ESW Rotax 250 racer, Kawasaki S2 350,
Yamaha RZV500R, Honda VFR400R. NSU Prima D 150 cc 1957

User avatar
Smoker
- - - - -
- - - - -
Posts: 1756
Joined: Sat Jun 14, 2008 7:16 am

Re: New RZV replica main harness and connectors (group purch

#29 Post by Smoker » Mon Oct 02, 2017 12:30 pm

I'll need a custom harness, but not sure when that will be.

Perhaps I should just buy an RZ500 connector set, just to be safe.

Could I get the info, if there's another purchase?

Thanks, again.

Racer
Posts: 57
Joined: Fri Oct 29, 2010 5:43 pm

Re: New RZV replica main harness and connectors (group purch

#30 Post by Racer » Wed Oct 04, 2017 4:29 am

torp68 wrote:Hi

I see above there are folks reporting interest in an RD500 harness. Has this been replicated?

Would be VERY interested in a new harness for my newly restored RD.
Feels awful to put that oily, butchered mess back onto the repainted frame..... :???:

Oyvind
PM sent

Racer
ESW Rotax 250 racer, Kawasaki S2 350,
Yamaha RZV500R, Honda VFR400R. NSU Prima D 150 cc 1957

Post Reply